TZG 9 3/4-140S Iron Roughneck | 140,000 N.m Torque
Overview:
HYRIG can supply the TZG 9 3/4-140S iron roughneck and its spare parts. This automated tool is designed for handling drill pipes and drill collars ranging from 2-7/8 to 9-3/4 inches, featuring a maximum breakout torque of 140,000 N.m and a spinning speed of 90 r/min.
| Dimension Item | Specification |
|---|---|
| Horizontal Travel | 2000 mm |
| Vertical Travel | 1000 mm |
| Installation | Guide rail mounted on drill floor |
The TZG 9 3/4-140S consists of spinning tongs, torque tongs, a telescopic arm, and hydraulic/electric control systems. The telescopic arm performs automatic alignment of forward/backward, up/down, and rotary movements. It uses a Siemens PLC and wireless control technology for three control modes: remote wireless, local emergency, and driller integrated.
When replacing an existing iron roughneck, verify the drill floor layout, rail system, and hydraulic power supply. The pipe range (2-7/8" to 9-3/4") covers most standard drill pipe and collar sizes, but ensure the torque rating meets your makeup requirements.
Need to match an iron roughneck with your rig? Tell us your drill pipe size and torque requirements, and our engineers will assist. For smaller pipe ranges, view the TZG 8.5-130S Iron Roughneck.
Used on drilling rigs to automate the connection and disconnection of drill pipes and collars, reducing manual labor and improving safety on the drill floor.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including spinning rollers, torque jaws, and hydraulic cylinders for the TZG 9 3/4-140S. Please see our Wellhead Tools page.
Specifications:
FAQ:
Contact Us:
For TZG 9 3/4-140S iron roughneck selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.