Iron Roughneck Series | TZGS Automated Tongs
Overview:
HYRIG can supply the TZGS series iron roughneck and its spare parts. These automated tools are designed for making up and breaking out drill pipes and drill collars on offshore and onshore rigs. They combine spinning tongs and high-torque tongs with a telescopic arm to improve safety and efficiency on the drill floor.
| Model | Pipe Handling Range | Max Breakout Torque (N·m) | Max Makeup Torque (N·m) | Spinning Speed (r/min) | Weight (kg) |
|---|---|---|---|---|---|
| TZG 9 3/4-140S | 2-7/8" - 9-3/4" | 140,000 | 98,000 | 90 | 4,000 |
| TZG 8.5-130S | 2-7/8" - 8-1/2" | 130,000 | 81,500 | 80 | 3,500 |
Data source: Technical data table.
The iron roughneck is installed on the drill floor. It requires a hydraulic power unit and a control system interface. The horizontal and vertical travel distances ensure it can reach both the well center and the mouse hole. Please verify the installation footprint and rail system against your rig floor layout.
The iron roughneck combines a spinning tong (for high-speed rotation) and a torque tong (for low-speed, high-torque makeup/breakout). The telescopic arm automatically aligns with the drill string. It uses a Siemens PLC and wireless control technology to allow operation from the driller's cabin or via a remote control.
Need help selecting an iron roughneck for your rig? Tell us your drill pipe size range and required torque, and our engineers will provide the correct model. For the power source, view our HPU and Components.
Used on drilling rigs to automate the connection and disconnection of drill pipes, reducing manual labor, improving safety, and increasing efficiency on the drill floor.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including spinning rollers, torque jaws, and hydraulic cylinders for the TZGS series. Please see our Wellhead Tools page.
Specifications:
FAQ:
Contact Us:
For TZGS iron roughneck selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.