The EMSCO F-800 and F-1000 are triplex single-acting piston pumps widely used in deep well drilling, high-pressure operations, land and offshore rigs, and well service applications. The F-800 is rated at 800 HP with a 6.75 inch x 9 inch (171.5 mm x 228.6 mm) bore and stroke configuration. The F-1000 is rated at 1,000 HP with a 6.75 inch x 10 inch (171.5 mm x 254 mm) bore and stroke configuration. Both models share the same fluid end module and accessory components, simplifying inventory management and reducing spare parts costs. Our EMSCO F-800 and F-1000 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for EMSCO F-800 & F-1000 with OEM Part Numbers:
Fluid End Modules:
Fluid End Module Complete Assembly (Includes Items 2–23) — OEM P/N: 6999-0086-02 (Qty 3)
Fluid End Module, Studded (Includes Items 2–8) — OEM P/N: 6999-0086-02 (Qty 3)
Fluid End Module (Unstudded) — OEM P/N: 6999-0087-02 (Qty 3)
Stud, Frame — OEM P/N: 7507-2205-00 (Qty 18)
Nut, Frame — OEM P/N: 7601-0630-17 (Qty 18)
Stud, Threaded Ring — OEM P/N: 7507-2150-00 (Qty 30)
Nut, Threaded Ring — OEM P/N: 7601-0630-28 (Qty 30)
Stud, Discharge Manifold — OEM P/N: 7507-2108-00 (Qty 12)
Nut, Discharge Manifold — OEM P/N: 7601-0630-24 (Qty 12)
Liner and Cylinder Components:
Liner Cage — OEM P/N: 6319-0026-00 (Qty 3)
Gasket, Liner Cylinder Head (G-282) — OEM P/N: 7602-2200-32 (Qty 6)
Cylinder Head Plug — OEM P/N: 6319-0031-00 (Qty 3)
Threaded Ring, Cylinder Head — OEM P/N: 6999-0089-00 (Qty 3)
Cap, Threaded Cylinder Head — OEM P/N: 6319-0090-00 (Qty 3)
Gasket, Valve Cover (G-740) — OEM P/N: 6319-0076-00 (Qty 3)
Valve Assembly and Components:
Lower Valve Guide with Bushing — OEM P/N: 6319-0087-00 (Qty 3)
Locking Clip (for Lower Valve Guide) — OEM P/N: 6319-0089-00 (Qty 3)
Upper Valve Guide — OEM P/N: 6397-0575-00 (Qty 3)
Valve Pot Cover — OEM P/N: 6319-0027-00 (Qty 3)
Retainer Plate (Upper) — OEM P/N: 6397-0603-00 (Qty 3)
Screw, Retainer (Upper) — OEM P/N: 7501-0051-00 (Qty 12)
Seals and Gaskets:
Gasket, Discharge Manifold — OEM P/N: 7602-1610-46 (Qty 3)
Gasket, Suction Manifold — OEM P/N: 7602-1600-61 (Qty 3)
Bushing, Lower Valve Guide — OEM P/N: 6316-0096-00 (Qty 3)
Module Seal Kit — OEM P/N: 07924503 (Includes G-282, G-740, 7602-1610-46, 7602-1600-61)
Liners (Premium Line):
Liner 4.5 inch — P/N: PPNO 07494450 (Ceramic), PPNO 05495450 (Supreme)
Liner 5 inch — P/N: PPNO 07494500 (Ceramic), PPNO 05495500 (Supreme)
Liner 5.5 inch — P/N: PPNO 07494550 (Ceramic), PPNO 05495550 (Supreme)
Liner 6 inch — P/N: PPNO 07494600 (Ceramic), PPNO 05495600 (Supreme)
Liner 6.5 inch — P/N: PPNO 07494650 (Ceramic), PPNO 05495650 (Supreme)
Liner Gasket (all sizes) — P/N: PPNO 07918282
Pistons and Rubber:
Piston White Lightning 5 inch — P/N: PPNO 1502056
Piston White Lightning 6 inch — P/N: PPNO 1502060
Piston White Lightning 6.5 inch — P/N: PPNO 1502062
Piston Green Duo 5 inch — P/N: PPNO 012180254
Piston Green Duo 6 inch — P/N: PPNO 012180395
Piston Rubber Supreme 5 inch — P/N: PPNO 011103033
Valve Assembly and Components (Premium Line):
Valve Urethane Insert — P/N: PPNO 9700285
Valve Rubber Insert — P/N: PPNO 9702601
Valve Spring — P/N: PPNO 8201650
Valve Cover — P/N: PPNO 07916740
Materials and Construction:
Each EMSCO F-800 and F-1000 part is made from materials selected for demanding oilfield service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with HNBR or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our EMSCO F-800 and F-1000 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The F-800 and F-1000 share the same fluid end module and accessory components, simplifying inventory management and reducing spare parts costs. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for deep well drilling, high-pressure drilling, land and offshore rigs, well service, and workover operations.
Compatibility:
All listed parts are direct replacements for EMSCO F-800 and F-1000 mud pump components. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.