The EMSCO FB-1300 and FB-1600 are triplex single-acting piston pumps featuring a 12-inch (305 mm) stroke and an “L” shaped fluid end design. The FB-1300 is a 1,300 HP pump, and the FB-1600 is a 1,600 HP pump rated at 120 SPM with a maximum working pressure of 5,000 PSI or 7,500 PSI depending on the fluid end configuration. Both models share the same L-shaped fluid end module and accessory components, simplifying inventory management and reducing spare parts costs. The “L” shaped fluid end configuration provides a compact, robust design with separate discharge and suction modules for simplified maintenance and component replacement. These pumps are widely used in deep well drilling, high-pressure operations, land and offshore rigs, and well service applications. Our EMSCO FB-1300 and FB-1600 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for EMSCO FB-1300 & FB-1600 with OEM Part Numbers:
Fluid End Modules (L-Shaped):
Complete Assembly — OEM P/N: A-8490-2A (Qty 3)
Fluid Module, Discharge - Studded (Includes Items 1–5) — OEM P/N: A-8490-1 (Qty 3)
Fluid Module, Discharge — OEM P/N: A-8490-2 (Qty 3)
Fluid Module, Suction - Studded (Includes Items 5–6) — OEM P/N: A-8490-2 (Qty 3)
Studs and Fasteners:
Stud with Nut, Frame — OEM P/N: A-4016-9 (Qty 18)
Stud with Nut, Suction Module — OEM P/N: A-4017-1 (Qty 18)
Stud with Nut, Discharge Manifold — OEM P/N: A-4017-46 (Qty 12)
Stud with Nut, Valve Cover — OEM P/N: A-4015-2 (Qty 72)
Valve Cover and Seals:
Valve Cover — OEM P/N: A-8490-2 (Qty 3)
Valve Cover Plug Assembly (Includes Items 11–14) — OEM P/N: A-4675-2A (Qty 6)
Plug, Valve Cover — OEM P/N: A-4675-2 (Qty 6)
Valve Guide Stud with Nut — OEM P/N: A-4775-2 (Qty 6)
Valve Guide Insert — OEM P/N: A-4016-99 (Qty 6)
Seal, Suction Manifold — OEM P/N: A-7602-1600-61 (Qty 3)
Seal, Discharge Manifold — OEM P/N: A-7602-1600-25 (Qty 3)
Wear Seal — Module and Wear Plate Seal — OEM P/N: A-2988 (Qty 3)
Liner and Cylinder Components:
Threaded Flange — OEM P/N: A-4475 (Qty 6)
Screw Gland — OEM P/N: A-4575 (Qty 6)
Liner Retainer Flange — OEM P/N: A-4700-I (Qty 6)
Dowel Pin — OEM P/N: A-P129 (Qty 6)
Capscrew - Liner Retainer — OEM P/N: A-6490-3 (Qty 24)
Nut - Liner Retainer — OEM P/N: A-4017-36 (Qty 3)
Pilot Ring - Liner Retainer — OEM P/N: A-6590-1 (Qty 3)
Plate - Liner Retainer — OEM P/N: A-8422-3 (Qty 3)
Liner Retainer Assembly — OEM P/N: A-8490-3 (Qty 3)
Valve Assembly and Components:
Valve White Lightning Insert — P/N: PPNO 9700368
Valve Urethane Insert — P/N: PPNO 9700250
Valve Rubber Insert — P/N: PPNO 9700293
Valve Seat — P/N: PPNO 9702504
Valve Spring — available for all FB-1300 and FB-1600 configurations
Materials and Construction:
Each EMSCO FB-1300 and FB-1600 part is made from materials selected for demanding high-pressure drilling service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with HNBR or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our EMSCO FB-1300 and FB-1600 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The “L” shaped fluid end design features separate discharge and suction modules that are interchangeable on the same pump, simplifying inventory management and reducing spare parts costs. The FB-1300 and FB-1600 share numerous fluid end components, further reducing inventory requirements. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for deep well drilling, high-pressure drilling, land and offshore rigs, well service, and workover operations.
Compatibility:
All listed parts are direct replacements for EMSCO FB-1300 and FB-1600 mud pump components. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.