The IDECO T-500, T-800, and T-1000 are triplex single-acting piston pumps widely used in oil and gas drilling, water well drilling, and geological exploration. The T-500 is rated at 500 HP with a 7 inch x 8 inch (177.8 mm x 203.2 mm) bore and stroke configuration, delivering a maximum pressure of 1591 PSI (110 bar) and a maximum flow rate of 493 GPM (2240 LPM). The T-800 is rated at 800 HP with a 7 inch x 9 inch (177.8 mm x 228.6 mm) bore and stroke configuration, rated for a maximum working pressure of 5,000 PSI. The T-1000 is rated at 1,000 HP with a 7 inch x 10 inch (177.8 mm x 254 mm) bore and stroke configuration, rated for a maximum working pressure of 5,000 PSI. All three models share a common fluid end module and accessory component design, simplifying inventory management and reducing spare parts costs. The pumps feature crossheads made of high-strength ductile iron or cast steel, with replaceable manganese bronze guides to create a low-friction, high-wear-resistant slide that ensures the absolute linearity of the piston rod motion, avoiding damage to the seals at the hydraulic end due to eccentric loading. Our IDECO T-500, T-800, and T-1000 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for IDECO T-500, T-800 & T-1000 with OEM Part Numbers:
Fluid End Modules:
Fluid Module, Studded — Part No. MK-551-458 (Qty 3)
Stud, Frame — Part No. MK-551-410-01 (Qty 24)
Stud, Discharge Manifold — Part No. MK-551-410-02 (Qty 12)
Stud, Threaded Ring — Part No. MK-551-410-03 (Qty 48)
Nut — Part No. MK-IN-416 (Qty 84)
Threaded Plug Retainer — Part No. MK-551-405-04 (Qty 6)
Threaded Ring — Part No. MK-551-405-03 (Qty 9)
Cylinder Head Plug — Part No. MK-551-422-02 (Qty 3)
Cylinder Head Plug Top — Part No. MK-551-422-03 (Qty 3)
Threaded Liner Retainer — Part No. MK-551-405-05 (Qty 3)
Lower Valve Guide — Part No. MK-551-405-07 (Qty 3)
Retainer, Lower Valve Guide — Part No. MK-551-422-04 (Qty 3)
Seal, Cylinder Head Plug and Liner — Part No. MK-BMT-1669-63-09 (Qty 9)
Seal, Discharge Manifold — Part No. MK-IO-548 (Qty 3)
Seal, Suction Manifold — Part No. MK-IO-521 (Qty 3)
Valve Guide Bushing — Part No. MK-551-405-09 (Qty 6)
Upper Valve Guide — Part No. MK-551-405-06 (Qty 3)
Liners:
Ceramic Liner 4 inch — Part No. 07512400 (T-1000), LA-0234-40 (T-500/T-800)
Ceramic Liner 4.5 inch — Part No. 07512450 (T-1000), LA-0234-44 (T-500/T-800)
Ceramic Liner 5 inch — Part No. 07512500 (T-1000), LA-0234-50 (T-500/T-800)
Ceramic Liner 5.5 inch — Part No. 07512550 (T-1000), LA-0234-54 (T-500/T-800)
Ceramic Liner 6 inch — Part No. 07512600 (T-1000), LA-0234-60 (T-500/T-800)
Ceramic Liner 6.25 inch — Part No. 07512625 (T-1000), LA-0234-62 (T-500/T-800)
Ceramic Liner 6.5 inch — Part No. 07512650 (T-1000), LA-0234-64 (T-500/T-800)
Ceramic Liner 7 inch — Part No. 07512700 (T-1000), LA-0234-70 (T-500/T-800)
Supreme Liner 4 inch — Part No. 05512400 (T-1000)
Supreme Liner 5 inch — Part No. 05512500 (T-1000)
Supreme Liner 6 inch — Part No. 05512600 (T-1000)
Supreme Liner 6.5 inch — Part No. 05512650 (T-1000)
Supreme Liner 7 inch — Part No. 05512700 (T-1000)
Liner Packing — Part No. LAG-0783
Liner Gasket — Part No. 07916783 (Rubber), 07916789 (Urethane)
Pistons and Rubber:
Piston 4 inch — Part No. MB40-15
Piston 4.5 inch — Part No. MB44-15
Piston 5 inch — Part No. MB50-15
Piston 5.5 inch — Part No. MB54-15
Piston 6 inch — Part No. MB60-15
Piston 6.5 inch — Part No. MB64-15
Piston 7 inch — Part No. MB70-15
Blue Lightning Piston Rubber 4 inch — Part No. 1502052
Blue Lightning Piston Rubber 5 inch — Part No. 1502056
Blue Lightning Piston Rubber 5.5 inch — Part No. 1502058
Blue Lightning Piston Rubber 6 inch — Part No. 1502060
Blue Lightning Piston Rubber 6.5 inch — Part No. 1502062
Blue Lightning Piston Rubber 7 inch — Part No. 1502064
Green Duo Piston Rubber 4 inch — Part No. 012180170
Green Duo Piston Rubber 5 inch — Part No. 012180254
Green Duo Piston Rubber 5.5 inch — Part No. 012180338
Green Duo Piston Rubber 6 inch — Part No. 012180395
Green Duo Piston Rubber 6.5 inch — Part No. 012180536
Green Duo Piston Rubber 7 inch — Part No. 012180619
White Lightning Piston Rubber 4 inch — Part No. 015180102
White Lightning Piston Rubber 5 inch — Part No. 015180186
White Lightning Piston Rubber 5.5 inch — Part No. 015180228
White Lightning Piston Rubber 6 inch — Part No. 015180269
White Lightning Piston Rubber 6.5 inch — Part No. 015180301
White Lightning Piston Rubber 7 inch — Part No. 015180343
Valve Assembly and Components:
Valve (4 Web Design) — Part No. TS-6-EH, LA-U5B-EH
Valve (Full Open Type) — Part No. TS-0995M, LA-6FO-V1
Valve Seat (4 Web Design) — Part No. TS-6-ADDB6, LA-6ADD-B6
Valve Seat (Full Open Type) — Part No. TS-1380M, LA-6FO-S1
Valve Spring — Part No. TS-5710-115, LA-5710-115
Valve Insert (Urethane) — Part No. TS-6-WI, LA-UDD-6AB
Valve Insert (Rubber) — Part No. TS-6-WR, LA-DD-6AB
Valve Seat Puller Head — Part No. LA-1700-6, LA-1700-6FO, LA-1700-6G2
Gaskets and Seals:
Valve Cover Gasket — Part No. G-783, LAG-0783
Cylinder Head Gasket — Part No. G-783, LAG-0783
Extension Rod Seal — Part No. TS-IP-805
Extension Rod Baffle — Part No. 551-406-09
Plug Seal — Part No. 061102653
Rods and Related:
Piston Rod — Part No. LA-0237 (T-500), available for T-800 and T-1000
Extension Rod — threaded type and clamp type available
Rod Clamp — available
Piston Rod Stud — available
Piston Nut — available
Materials and Construction:
Each IDECO T-500, T-800, and T-1000 part is made from materials selected for demanding oilfield service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with urethane, rubber, or replaceable cup designs. Piston cores are made of 42CrMo, and piston rubbers use nitrile butadiene rubber, polyurethane rubber, or special rubber. Valve bodies and seats use forged alloy steel with advanced heat treatment. Crosshead guides use replaceable manganese bronze for low-friction and high-wear resistance. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our IDECO T-500, T-800, and T-1000 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. All three models share a common fluid end module design, simplifying inventory management and reducing spare parts costs. The robust crosshead design with replaceable manganese bronze guides ensures absolute linearity of piston rod motion, avoiding damage to hydraulic end seals due to eccentric loading. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for oil and gas drilling, water well drilling, geological exploration, and grouting operations.
Compatibility:
All listed parts are direct replacements for IDECO T-500, T-800, and T-1000 mud pump components. The three models share numerous fluid end components, including the fluid module (MK-551-458), studs, nuts, seals, and valve guide components. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.