The IDECO T-1300 and T-1600 are triplex single-acting piston pumps with a 12-inch (304.8 mm) stroke, rated for a maximum working pressure of 5,000 PSI (34.5 MPa). The T-1300 is a 1,300 HP pump, and the T-1600 is a 1,600 HP pump with a 7.5 inch x 12 inch (190.5 mm x 304.8 mm) bore and stroke configuration. Both models accommodate liner sizes from 4 inch to 7.5 inch (101.6 mm to 190.5 mm) and are widely used in deep well drilling, high-pressure operations, land and offshore rigs, and well service applications. The T-1300 and T-1600 share numerous fluid end components, simplifying inventory management and reducing spare parts costs. The pumps are available with both standard L-shaped and I-shaped fluid end configurations. The L-shaped fluid end design features separate discharge and suction modules that are interchangeable on the same pump. Our IDECO T-1300 and T-1600 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for IDECO T-1300 & T-1600 with OEM Part Numbers:
Fluid End Modules:
Fluid Module, Studded (Includes Items 1 to 6) — Part No. MK-551-122-01 (Qty 3)
Stud, Frame — Part No. MK-551-110-01 (Qty 24)
Stud, Discharge Manifold — Part No. MK-551-110-02 (Qty 12)
Stud, Threaded Ring — Part No. MK-551-110-03 (Qty 48)
Nut, Threaded Ring — Part No. MK-IN-415 (Qty 72)
Nut, Discharge Manifold — Part No. MK-IN-416 (Qty 12)
Threaded Plug Retainer — Part No. MK-551-105-04 (Qty 6)
Threaded Ring — Part No. MK-551-105-03 (Qty 9)
Cylinder Head Plug — Part No. MK-551-122-02 (Qty 3)
Cylinder Head Plug Top — Part No. MK-551-122-03 (Qty 3)
Threaded Liner Retainer — Part No. MK-551-105-05 (Qty 3)
Lower Valve Guide — Part No. MK-551-105-07 (Qty 3)
Retainer, Lower Valve Guide — Part No. MK-551-105-08 (Qty 3)
Seal, Cylinder Head Plug and Liner — Part No. MK-BMT-1669-63-08 (Qty 9)
Seal, Discharge Manifold — Part No. MK-IO-548 (Qty 3)
Seal, Suction Manifold — Part No. MK-IO-507 (Qty 3)
Valve Guide Bushing — Part No. MK-551-105-09 (Qty 6)
Upper Valve Guide — Part No. MK-551-105-06 (Qty 3)
L-Shaped Fluid End Assembly:
Complete Assembly — Part No. A-8407-7A
Fluid Module, Discharge Studded — Part No. A-8407-7
Stud with Nut, Frame — Part No. A-4018-68
Stud with Nut, Liner Retainer — Part No. A-4016-97
Stud with Nut, Suction Module — Part No. A-4017-50
Stud with Nut, Discharge Manifold — Part No. A-4015-2
Fluid Module, Suction Studded — Part No. A-8407-11
Seal, Suction Module — Part No. A-2988
Dowel Pin — Part No. A-8488-5
Seal, Suction Manifold — Part No. A-IO-507
Threaded Flange — Part No. A-4475
Screw Gland — Part No. A-4575
Valve Cover Plug Assembly — Part No. A-4675-2A
Plug, Valve Cover — Part No. A-4675-2
Valve Guide Stud with Nut — Part No. A-4775-2
Valve Guide Insert — Part No. A-4016-99
Seal, Valve Cover Plug — Part No. A-4700-I
Liner Retainer Flange — Part No. A-P129
Nut, Liner Retainer — Part No. A-6407
Plate, Wear — Part No. A-6507
Seal, Wear Plate — Part No. A-8407-10
Seal, Discharge Manifold — Part No. A-IO-548
Cylinder Liners:
Hy-chrome Liner — over 27 percent chrome iron inner sleeve in forged steel outer shell. Bore hardness 60 to 65 HRC, hull tensile strength more than 90,000 psi. Service life 800+ hours.
Ceramic Liner — combines strength of forged steel outer shell with abrasion and corrosion resistance of ceramic inner sleeve. Service life over 4000 hours.
Chrome-plated Liner — premium forged steel with chrome-coated core. Hardness 58 to 62 HRC.
Hardened Liner — premium seamless steel tube or forged steel, carburized and quenched, hardness 58 to 62 HRC.
Liner Gasket — Part No. G-783 (all sizes)
Pistons and Rubber:
Urethane Bonded Piston — available in all standard sizes
Rubber Bonded Piston — available in all standard sizes
Endurance Bonded Piston — available in all standard sizes
Replaceable Rubber Piston — available in all standard sizes
Valve Assembly and Components:
Valve (4 Web Design) — Part No. TS-6-EH
Valve (Full Open Type 1) — Part No. TS-0995M
Valve (Full Open Type 2) — Part No. TS-6-V1
Valve Seat (4 Web Design) — Part No. TS-6-ADDB6
Valve Seat (Full Open Type 1) — Part No. TS-1380M
Valve Seat (Full Open Type 2) — Part No. TS-6-S6
Valve Spring — Part No. TS-5710-115
Valve Insert Urethane — Part No. TS-6-WI (4 Web), TS-6-MI (Full Open 1), TS-6-FI (Full Open 2)
Valve Insert Rubber — Part No. TS-6-WR (4 Web), TS-6-FR (Full Open 2)
Gaskets and Seals:
Valve Cover Gasket — Part No. G-783
Cylinder Head Gasket — Part No. G-783
Extension Rod Seal — Part No. TS-IP-805
Extension Rod Baffle — Part No. 551-406-09
Rods and Related:
Piston Rod — threaded type and clamp type available
Extension Rod — threaded type and clamp type available
Rod Clamp — available
Piston Rod Stud — available
Piston Nut — available
Fluid End Accessories:
Threaded Liner Retainer — Part No. 551-105-05
Threaded Plug Retainer — Part No. 551-105-04
Threaded Ring — Part No. 551-105-03
Cylinder Head Plug — Part No. 551-122-02
Cylinder Head Plug Top — Part No. 551-122-03
Valve Cover — Part No. 8407-11
Valve Cover Gasket — Part No. BMT-1669-63-08
Discharge Manifold Gasket — Part No. IO-548
Suction Manifold Gasket — Part No. IO-507
Wear Plate — Part No. 8407-10
Power End Components:
Crankshaft — Part No. 551-100-01
Connecting Rod — Part No. 551-100-04
Crosshead — Part No. 551-106-01 (TM88500122)
Crosshead Guide Upper — Part No. 551-106-02 (TM09450150)
Crosshead Guide Lower — Part No. 551-106-03 (TM09450128)
Stripper Box — Part No. 551-106-13
Extension Rod — Part No. 551-106-06
Main Bearing — Part No. IB-1330 (581201)
Eccentric Bearing — Part No. IB-670 (TM58120157)
Crosshead Bearing — Part No. IB-671 (TM58120129)
External Retaining Ring — Part No. 551-100-06
Internal Retaining Ring — Part No. 551-100-05
Pump Drive Gear — Part No. 551-108-01
Oil Pump — Part No. IP-424
Relief Valve — Part No. IV-118
Oil Seal (11 x 22-1/4 x 5/8 inch) — Part No. IO-404
Materials and Construction:
Each IDECO T-1300 and T-1600 part is made from materials selected for demanding high-pressure drilling service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with urethane, rubber, or replaceable cup designs. Piston cores are made of 42CrMo, and piston rubbers use nitrile butadiene rubber, polyurethane rubber, or special rubber. Valve bodies and seats use forged alloy steel with advanced heat treatment. The power frame uses high-strength cast steel construction. Crosshead guides use replaceable manganese bronze. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our IDECO T-1300 and T-1600 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The T-1300 and T-1600 share numerous fluid end components, simplifying inventory management and reducing spare parts costs. The L-shaped fluid end design features separate discharge and suction modules that are interchangeable on the same pump. The T-1600 is capable of 5,000 PSI maximum working pressure for high-pressure drilling operations. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for deep well drilling, high-pressure drilling, land and offshore rigs, well service, and workover operations.
Compatibility:
All listed parts are direct replacements for IDECO T-1300 and T-1600 mud pump components. The T-1300 and T-1600 are highly interchangeable for fluid end components including liners, pistons, valve assemblies, modules, and rods. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.