F-1600 Mud Pump | 1600 HP & 5000 psi Triplex Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the F-1600 mud pump and its spare parts. The F-1600 is a triplex single-acting piston mud pump designed for oil and gas drilling, featuring a rated power of 1600 HP, a maximum working pressure of 5000 psi, and a heavy-duty steel plate welded frame.
Conatct For Details
DetailReview(0)Additional

F-1600 Mud Pump | 1600 HP & 5000 psi Triplex Pump

Overview:

HYRIG can supply the F-1600 mud pump and its spare parts. The F-1600 is a triplex single-acting piston mud pump designed for oil and gas drilling, featuring a rated power of 1600 HP, a maximum working pressure of 5000 psi, and a heavy-duty steel plate welded frame.

Key Specifications

ModelRated Power (kW/HP)Stroke Rating (r/min)Max Liner Size (mm)Gear RatioApprox. Weight (kg)
F-1300969 / 1300120180 x 3054.206:126,700
F-16001193 / 1600120180 x 3054.206:124,791
F-22001640 / 2200105230 x 3563.512:138,460

Data source: Technical data table.

Dimensions (Text-Based)

Dimension ItemSpecification
Max Liner Size x Stroke180 x 305 mm (7 x 12 in)
Suction Inlet Flange12 in
Discharge Outlet Flange5 in (5000 psi)
Pinion Shaft Diameter215.9 mm (8-1/2 in)
Approx. Weight24,791 kg

Structure / Working Principle

The F-1600 mud pump utilizes a horizontal, triplex single-acting piston design. Power is transmitted from the engine to the pinion shaft, driving the crankshaft. The crankshaft converts rotary motion into the reciprocating motion of the crossheads and pistons. The hydraulic end features a forged steel fluid cylinder and is equipped with a suction damper and discharge air bag to smooth pressure fluctuations.

Cross-Reference & Replacement

When replacing a mud pump, the critical parameters to verify are the required flow rate (GPM) and pressure (PSI), which dictate the liner size. The F-1600 is compatible with standard L-style fluid ends. The footprint and drive shaft connection must be verified against the existing power unit (such as diesel engine or electric motor).

Selection Support

Not sure which mud pump model or liner size fits your well depth and drilling program? Tell us your required flow rate and pressure, and our engineers will provide the correct configuration. For higher pressure demands, explore the F-1600HL Mud Pump.

Applications

Suitable for oil and gas drilling rigs, workover operations, and well cementing. Designed to circulate drilling fluid (mud) under high pressure to cool the drill bit and carry cuttings to the surface.

Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.

Spare Parts

HYRIG provides a full range of replacement parts for the F-series mud pumps, including wear components such as pistons, liners, valves, and seats. Whether you need a complete fluid end module or specific maintenance kits, we have you covered. Please see our F-Series Mud Pump Parts for detailed part number lists.

Specifications:

  • Model: F-1600
  • Rated Power: 1600 HP
  • Max Pressure: 5000 psi
  • Stroke Length: 12 in (305 mm)
  • Gear Ratio: 4.206:1
  • Structure: Triplex single-acting piston

FAQ:

  • 1. What is the maximum working pressure of the F-1600? The maximum working pressure is 5000 psi (34.5 MPa), depending on the liner size used.
  • 2. Can the F-1600 mud pump be driven by an electric motor? Yes, it can be driven by a diesel engine or an electric motor via a belt drive or chain drive.
  • 3. How do I choose the right liner size? Liner size is determined by the required flow rate and pressure. A larger liner provides higher flow but lower pressure, and vice versa.

Contact Us:

For F-1600 mud pump selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit