F-Series Mud Pump Parts | Liners, Pistons & Valves

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG provides a full range of replacement parts for the F-series mud pumps, including the F-500, F-800, F-1000, F-1300, F-1600, and F-2200. Whether you need a complete fluid end module or specific wear components like liners and pistons, we have you covered.
Conatct For Details
DetailReview(0)Additional

F-Series Mud Pump Parts | Liners, Pistons & Valves

Overview:

HYRIG provides a full range of replacement parts for the F-series mud pumps, including the F-500, F-800, F-1000, F-1300, F-1600, and F-2200. Whether you need a complete fluid end module or specific wear components like liners and pistons, we have you covered.

Dimensions (Text-Based)

Wear parts are sized according to the pump's liner diameter and stroke. Always verify the specific pump model and liner size when ordering. For example, the F-1600 has a stroke of 12 inches, while the F-500 has a stroke of 7.5 inches.

Structure / Working Principle

Mud pump wear parts are subject to high pressure and abrasive fluids. The piston moves back and forth in the liner to displace the mud, while the valves open and close to control the flow. Regular replacement of these components is essential for maintaining pump efficiency.

Compatible Host Models

These parts are compatible with the following mud pumps:

Selection Support

Not sure which part number you need? Tell us your mud pump model, liner size, and the part name, and our engineers will provide the correct part number and quotation. For the complete pump assembly, view our Mud Pump Series.

Applications

Used in the mud circulation system to maintain pump performance and ensure continuous drilling operations.

Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.

Spare Part Table

Part NameAssociated ModelQty
LinerF-Series3
PistonF-Series3
Valve & SeatF-Series6
Fluid End Gasket KitF-Series1 Set

Qty as per parts list; verify against original drawing.

Specifications:

  • Liner (4 1/2" - 7"): Associated Pump Model F-500 to F-2200; Material High-chrome alloy
  • Piston Assembly: Associated Pump Model F-500 to F-2200; Material Urethane / Rubber
  • Valve and Seat: Associated Pump Model F-500 to F-2200; Material Forged Steel
  • Fluid End Module: Associated Pump Model F-1300 / F-1600; Material Forged Steel
  • Product Type: Mud Pump Wear Parts
  • Compatible Pumps: F-500 to F-2200
  • Key Components: Liners, Pistons, Valves, Seats, Fluid End Modules
  • Material: High-strength alloy steel and wear-resistant materials

FAQ:

  • 1. How do I choose the right liner size? Liner size is determined by the required flow rate and pressure. A larger liner provides higher flow but lower pressure, and vice versa.
  • 2. What material are the valves made of? The valves and seats are typically made of high-strength forged steel or wear-resistant alloys.
  • 3. Do you provide the complete fluid end module? Yes, we can supply the complete fluid end assembly or individual components.

Contact Us:

For F-Series mud pump parts selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit