| Model | Nominal Size | Max Pressure | Max Flow | Pilot Ratio |
|---|---|---|---|---|
| FD12 | DN12 | 42 MPa | 80 L/min | 1:20 |
| FD16 Valve | DN16 | 42 MPa | 200 L/min | 1:20 |
| FD25 Valve | DN25 | 42 MPa | 320 L/min | 1:20 |
Data source: Technical data table.
Text-based mounting parameters for the FD12 (KA Type):
| Parameter | Specification |
|---|---|
| Port Thread | M42x2 (A, B, X) |
| Body Width (B1) | 48 mm |
| Body Length (L1) | 163 mm |
| Height (L11) | 165 mm |
| Weight | Approx. 2.8 kg |
Free flow occurs from A to B. Flow from B to A is blocked until pilot pressure at X reaches 1/20th of the load pressure. The valve is available with an integrated check valve and optional secondary pressure relief (FB type).
`FD12` + `Mounting (KA/PA/FA/FB)` + `A/B (With/Without relief)` + `12` + `Orifice (B00/B30/B40/B60)`.
Used in small cranes, winches, and hydraulic power packs for load holding.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help selecting the mounting type? Contact our engineers with your system specifications.
Q: What is the max flow for the FD12?
A: The FD12 supports a maximum flow rate of 80 L/min.
Q: What O-ring is used for the FD12?
A: The FD12 uses O-ring size 25 x 3.5 for the main ports.
Q: Do you supply the mounting bolts?
A: Yes, bolts like 4-M10x70-10.9 can be supplied separately.
For FD12 counterbalance valve selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.