1. Product Overview
The OH2 Series Fuel Oil Pump is a horizontal, single-stage, single-suction, overhung, centerline-mounted, radially split centrifugal pump, strictly designed and manufactured in accordance with API 610 (ISO 13709) international standards. It is purpose-built for demanding applications such as refinery fuel oil systems, power plants, and industrial boilers, handling both heavy and light fuel oils (including residual oil, heavy fuel oil, and marine fuel oil). Designed for media with viscosity 5–500 mm²/s and temperatures up to 200°C, it achieves long‑term continuous operation (annual operation rate ≥99.5%) and is a critical equipment for fuel oil storage turnover, pipeline transfer, and boiler feeding.
Model Code Interpretation (OH2):
O = Overhung: Impeller is positioned outside the bearing housing – compact structure, facilitating high‑viscosity sealing and heat dissipation.
H = Horizontal: Horizontal mounting, compatible with pipeline layouts of fuel oil tanks, boilers, and heaters – easy installation and maintenance.
2 = 2nd Generation: Centerline support design (vs. foot-mounted OH1) – superior thermal stability for temperature fluctuations during fuel oil transfer.
2. Key Structural Features (Fuel Oil‑Specific Design)
Centerline Mounting + High‑Temperature Stability: Pump casing is cast steel or ductile iron, centerline‑mounted with minimal thermal deformation from -40°C to 200°C. Shaft runout ≤0.02 mm, reducing seal leakage at high temperatures.
Wide Flow Path + Anti‑Clogging Design: Impeller and casing flow paths are widened with no dead zones, suitable for fuel oil containing trace impurities. Optional semi‑open impeller improves solids passage.
High‑Temperature Sealing System: Standard API 682 Type 21 double mechanical seals. Friction pairs use silicon carbide + graphite, suitable for 200°C service. Supports Plan 52/53 flush schemes to reduce coking risk at high temperatures.
Heavy‑Duty Bearings + Long Life: Heavy‑duty bearing housing with large oil reservoir, oil ring/oil mist lubrication. Bearing life ≥25,000 hours. Equipped with temperature and vibration monitoring ports.
3. General Technical Specifications
| Parameter | Value |
|---|---|
| Capacity | 5 – 2,600 m³/h |
| Head | 30 – 395 m (max. 1,300 ft) |
| Operating Temperature | -40°C to 200°C (250°C optional) |
| Inlet Pressure | ≤0.3 MPa; Outlet Pressure ≤5.0 MPa |
| Media Viscosity | 5 – 500 mm²/s |
| Material Options | Carbon steel (WCB), ductile iron, stainless steel (304/316) |
| Explosion Protection | Ex d IIB T3/T4 (Zone 1/2) |
| Speed | 50Hz: 1,450/2,900 rpm; 60Hz: 1,750/3,500 rpm (low speed for high viscosity) |
| Flange Rating | Class 150/300/600# (RF, ASME B16.5) |
4. Global Equivalent Models (API 610 OH2 for Fuel Oil)
| Brand | Series / Models | Key Adaptation |
|---|---|---|
| Sulzer | OHH 25-200, 40-250, 80-400 | Anti‑cavitation, heavy‑duty design for high‑viscosity fuel oil |
| Flowserve | HPX 310, 410, 510 | High temperature (200°C), large flow – refinery/power plant dedicated |
| KSB | KZE 80-200, 100-315 | High efficiency, low noise – common for boiler fuel supply |
| Rodelta | HZC 50-250, 80-315 | Duplex steel option for high‑sulfur fuel oil |
| Amarinth | OH2 custom | Special alloys for aggressive residual oils |
5. Complete OH2 Fuel Oil Pump Model Lineup (20 Core Models by Size)
Small Bore (DN40/DN50 – Small Flow, High Head)
Fuel Oil Pump 40-250 OH2 – API 610 OH2, DN40 outlet, 250mm impeller. Capacity/Head: 25–50 m³/h / 80–110 m. Power: 15 kW. Application: Small boiler fuel supply, lab transfer.
Fuel Oil Pump 50-160 OH2 – DN50, 160mm impeller. Capacity/Head: 30–60 m³/h / 35–50 m. Power: 7.5 kW. Application: Small tank turnover, boiler ignition pump.
Fuel Oil Pump 50-200 OH2 – DN50, 200mm impeller. Capacity/Head: 30–65 m³/h / 50–70 m. Power: 11 kW. Application: Refinery light fuel oil transfer.
Fuel Oil Pump 50-250 OH2 – DN50, 250mm impeller (high pressure). Capacity/Head: 30–65 m³/h / 80–115 m. Power: 18.5 kW. Application: High‑pressure boiler feed, atomizing pump.
Medium Bore (DN65/DN80 – Medium Flow, General Purpose)
Fuel Oil Pump 65-160 OH2 – DN65, 160mm impeller. Capacity/Head: 50–100 m³/h / 32–48 m. Power: 15 kW. Application: Medium terminal, boiler supply pump.
Fuel Oil Pump 65-200 OH2 – DN65, 200mm impeller. Capacity/Head: 50–110 m³/h / 48–72 m. Power: 22 kW. Application: Refinery product/intermediate tank transfer.
Fuel Oil Pump 65-250 OH2 – DN65, 250mm impeller. Capacity/Head: 50–110 m³/h / 75–110 m. Power: 37 kW. Application: Long‑distance pipeline, high‑pressure atomizing.
Fuel Oil Pump 65-315 OH2 – DN65, 315mm impeller (high head). Capacity/Head: 45–100 m³/h / 120–160 m. Power: 55 kW. Application: High‑head boiler, mountainous transfer.
Fuel Oil Pump 80-160 OH2 – DN80, 160mm impeller. Capacity/Head: 80–160 m³/h / 30–48 m. Power: 30 kW. Application: Power plant/refinery large flow turnover.
Fuel Oil Pump 80-200 OH2 – DN80, 200mm impeller (main duty). Capacity/Head: 80–160 m³/h / 48–72 m. Power: 45 kW. Application: Dock loading, large boiler supply.
Fuel Oil Pump 80-250 OH2 – DN80, 250mm impeller. Capacity/Head: 80–160 m³/h / 75–115 m. Power: 75 kW. Application: Heavy fuel oil transfer, long‑distance pipeline.
Fuel Oil Pump 80-315 OH2 – DN80, 315mm impeller (large flow high pressure). Capacity/Head: 75–150 m³/h / 120–165 m. Power: 110 kW. Application: High‑pressure network, large power station supply.
Large Bore (DN100/DN125/DN150 – Large Flow, Industrial Scale)
Fuel Oil Pump 100-200 OH2 – DN100, 200mm impeller. Capacity/Head: 120–220 m³/h / 45–70 m. Power: 75 kW. Application: Large tank farm, refinery main transfer pump.
Fuel Oil Pump 100-250 OH2 – DN100, 250mm impeller. Capacity/Head: 120–220 m³/h / 70–110 m. Power: 132 kW. Application: Port loading, cross‑country pipeline.
Fuel Oil Pump 100-315 OH2 – DN100, 315mm impeller (high pressure). Capacity/Head: 120–220 m³/h / 115–160 m. Power: 200 kW. Application: High‑pressure boiler, power plant backup.
Fuel Oil Pump 100-400 OH2 – DN100, 400mm impeller (ultra‑high head). Capacity/Head: 110–210 m³/h / 180–240 m. Power: 315 kW. Application: Ultra‑high pressure system, mountainous transfer.
Fuel Oil Pump 125-250 OH2 – DN125, 250mm impeller (very large flow). Capacity/Head: 200–350 m³/h / 65–100 m. Power: 160 kW. Application: National strategic reserve, refinery finished product pump.
Fuel Oil Pump 125-315 OH2 – DN125, 315mm impeller (very large flow high pressure). Capacity/Head: 200–350 m³/h / 110–155 m. Power: 250 kW. Application: Large terminal, tank farm main pump.
Fuel Oil Pump 150-315 OH2 – DN150, 315mm impeller (extra‑large flow). Capacity/Head: 300–550 m³/h / 90–140 m. Power: 355 kW. Application: 10+ Mt/y refinery, cross‑border pipeline.
Fuel Oil Pump 150-400 OH2 – DN150, 400mm impeller (top large flow high pressure). Capacity/Head: 300–550 m³/h / 160–220 m. Power: 500 kW. Application: Ultra‑large tank farm, global fuel oil terminal main pump.
6. Selection Notes (Fuel Oil‑Specific)
Viscosity adaptation: For viscosity >200 mm²/s, select low speed (1,450 rpm) and increase motor power.
Temperature control: For media >120°C, use cooled bearing housing and Plan 53 flush.
Explosion protection: Zone 1 – Ex d IIB T3; Zone 2 – Ex nA IIB T3.
Cavitation resistance: Ensure NPSHa ≥ NPSHr + 0.5 m, especially for high‑volatility fuel oils.
Material selection: Use 316 stainless steel for high‑sulfur fuel oil; carbon steel or ductile iron for standard fuel oil.
7. Contact Us
For detailed technical datasheets, model selection assistance (free selection report with media viscosity, temperature, flow/head), 3D models (STEP/IGES), certification documents (explosion‑proof, API 610), and customized solutions (high‑viscosity, high‑temp, special alloys), please contact:
Email: info@hyrig.com
Our engineering team responds within 24 hours with API 610 compliant solutions tailored to your fuel oil transfer and boiler feeding needs.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.