1. Product Overview
The OH2 Series Lube Oil Pump is a horizontal, single-stage, single-suction, overhung, centerline-mounted, radially split centrifugal pump, strictly designed and manufactured in accordance with API 610 12th Edition (ISO 13709) international standards. It is purpose-built for demanding applications such as power plant steam turbines, industrial gearboxes, large compressors, and marine propulsion systems. This pump is specifically engineered to handle industrial lubricating oils (mineral oil, synthetic oil, anti-wear hydraulic oil, gear oil), with media characteristics including viscosity 10–1500 mm²/s (at ambient temperature), cleanliness requirement NAS 6–8, and operating temperature range -20°C to 150°C. It achieves long‑term continuous operation (annual operation rate ≥99.8%) and is a critical equipment for industrial machinery lubrication, cooling, and hydraulic transmission systems.
Model Code Interpretation (OH2):
O = Overhung: Impeller outside bearing housing – compact structure, facilitates high‑viscosity sealing.
H = Horizontal: Horizontal mounting, compatible with lube oil system layouts.
2 = 2nd Generation: Centerline support design (no rear bearing housing bracket per API 610 9.1.1.1), allowing axial thermal expansion compensation for high‑temperature lube oil service.
Key API 610 Compliance Features:
Centerline mounting fully compliant with API 610 9.1.1.1 – no rear bracket, free axial expansion.
Back pull‑out design per API 610 9.1.1.2 – rotor removal without disconnecting piping or motor.
Impeller dynamic balance as per OH2 specific requirements – ensures stability for high‑viscosity media.
2. Key Structural Features (Lube Oil‑Specific Design)
High‑Viscosity Optimized Flow Path: Impeller with wide channels, low specific speed (n_s = 80–150). CFD‑optimized, surface roughness Ra ≤0.8 μm. Flow retention rate ≥88% over viscosity range 10–1500 mm²/s. Tapered inducer at impeller inlet reduces flow resistance – NPSHr ≤3.5 m for cold high‑viscosity startup.
Wear‑Resistant Sealing System: Standard API 682 Type 23 double mechanical seals. Friction pairs use tungsten carbide (WC) + PTFE‑filled graphite, resistant to oil aging. Seal chamber with grease replenishment channel. Leakage ≤2 ppm. Supports Plan 53B flush (external clean oil) to prevent seal wear from trace impurities. Seal life ≥12,000 hours.
Centerline Thermal Stability: Cast steel (WCB) or ductile iron one‑piece casing. Shaft runout ≤0.02 mm from -20°C to 150°C, fully compliant with API 610 thermal distortion control. Shaft material 42CrMo alloy steel, quenched and tempered. Shaft flexibility index (SFI) calculated per API 610 Appendix K – ensures rigidity against deflection under high‑viscosity loads.
Cleanliness Retention Design: Dead‑free casing flow path. 100‑mesh stainless steel inlet strainer (200‑mesh optional). Bottom drain port for sediment removal – maintains lube oil cleanliness to NAS 6, preventing wear in lubrication systems.
3. General Technical Specifications (Lube Oil‑Specific)
| Parameter | Value |
|---|---|
| Capacity | 5 – 2,800 m³/h (customizable to 3,000 m³/h) – supports small flow lubrication (5–50 m³/h) and large flow cooling circulation (500–2,800 m³/h) |
| Head | 20 – 400 m (max. 1,312 ft) – stable output at 10–1500 mm²/s |
| Operating Temperature | -20°C to 150°C (common 40–100°C); high‑temp version to 200°C (chrome‑moly steel); low‑temp to -30°C (A352 LCB) |
| Inlet Pressure | -0.03 MPa to 0.2 MPa; Outlet Pressure: 0.2–10 MPa (standard 4 MPa, max 10 MPa) |
| Media Viscosity | 10 – 1500 mm²/s (ambient) – supports high‑viscosity gear oil (500–1500 mm²/s) |
| Motor Power | 2.2 – 630 kW, efficiency ≥91% – power redundancy ≥15% for high‑viscosity duty |
| Speed | 50Hz: 1,450/2,900 rpm; 60Hz: 1,750/3,500 rpm – low speed for viscosity >500 mm²/s |
| Flange Rating | Class 150/300/600# (RF, ASME B16.5) |
| Material Options | Carbon steel (WCB for standard oil), Ductile iron (QT450-10 for wear resistance), Stainless steel (304/316 for synthetic or food‑grade oils) |
| Standards | API 610 12th, GB/T 3215, ISO 15156, GB/T 14728 (lube oil pump standard) |
4. Global Equivalent Models (API 610 OH2 for Lube Oil)
| Brand | Series / Models | Key Adaptation |
|---|---|---|
| Sulzer | OHH 32-200, 50-250, 100-315 | Turbine lube dedicated, high‑viscosity optimized, SFI shaft stiffness design, seal life ≥15,000 hours |
| Flowserve | HPX 350, 450, 550 | Industrial gearbox lubrication, Plan 53B flush, suitable for 1000 mm²/s gear oil |
| KSB | KZE 65-200, 80-250 | Marine propulsion lube, vibration resistant, noise ≤72 dB(A), marine corrosion protection |
| NOP (Japan) | TOP-212HWMVB, 216HWMVB | Small equipment lube – compact, gerotor derivative, low‑pressure systems |
| Amarinth | OH2 custom | Synthetic lube dedicated, Incoloy 800, resists high‑temperature oil aging |
5. Complete OH2 Lube Oil Pump Model Lineup (20 Core Models by Size)
Small Bore (DN40/DN50 – Small Equipment / Lab)
Lube Oil Pump 40-250 OH2 – API 610 OH2, DN40 outlet, 250mm impeller, high pressure small flow. Capacity/Head: 25–50 m³/h / 80–110 m. Power: 18.5 kW. Application: Small gearbox lubrication, lab precision equipment supply.
Lube Oil Pump 40-315 OH2 – DN40, 315mm impeller, ultra‑high head. Capacity/Head: 20–45 m³/h / 120–160 m. Power: 22 kW. Application: High‑pressure hydraulic system, small compressor lube.
Lube Oil Pump 50-160 OH2 – DN50, 160mm impeller, general small flow. Capacity/Head: 30–60 m³/h / 35–50 m. Power: 11 kW. Application: Machine tool lubrication, small turbine lube.
Lube Oil Pump 50-200 OH2 – DN50, 200mm impeller, standard. Capacity/Head: 30–65 m³/h / 50–70 m. Power: 15 kW. Application: Industrial fan lubrication, small hydraulic station.
Lube Oil Pump 50-250 OH2 – DN50, 250mm impeller, high pressure. Capacity/Head: 30–65 m³/h / 80–115 m. Power: 22 kW. Application: High‑pressure gearbox lube, precision instrument hydraulics.
Medium Bore (DN65/DN80 – Medium Equipment / Centralized Lube)
Lube Oil Pump 65-160 OH2 – DN65, 160mm impeller, medium flow low pressure. Capacity/Head: 50–100 m³/h / 32–48 m. Power: 18.5 kW. Application: Medium gearbox cluster, shop centralized lube system.
Lube Oil Pump 65-200 OH2 – DN65, 200mm impeller, medium flow general. Capacity/Head: 50–110 m³/h / 48–72 m. Power: 30 kW. Application: Compressor unit lubrication, medium hydraulic station.
Lube Oil Pump 65-250 OH2 – DN65, 250mm impeller, medium flow high pressure. Capacity/Head: 50–110 m³/h / 75–110 m. Power: 45 kW. Application: Large fan lube, long‑distance centralized lube pipeline.
Lube Oil Pump 65-315 OH2 – DN65, 315mm impeller, medium flow ultra‑high head. Capacity/Head: 45–100 m³/h / 120–160 m. Power: 75 kW. Application: High‑pressure hydraulics, mountainous plant centralized lube booster.
Lube Oil Pump 80-160 OH2 – DN80, 160mm impeller, large flow low pressure. Capacity/Head: 80–160 m³/h / 30–48 m. Power: 37 kW. Application: Power plant auxiliary lube, large shop central supply main pump.
Lube Oil Pump 80-200 OH2 – DN80, 200mm impeller, main duty. Capacity/Head: 80–160 m³/h / 48–72 m. Power: 55 kW. Application: Steam turbine lube system, large hydraulic station circulation.
Lube Oil Pump 80-250 OH2 – DN80, 250mm impeller, large flow medium‑high pressure. Capacity/Head: 80–160 m³/h / 75–115 m. Power: 90 kW. Application: Industrial gearbox cluster lube, long‑distance lube main pipeline.
Lube Oil Pump 80-315 OH2 – DN80, 315mm impeller, large flow high pressure. Capacity/Head: 75–150 m³/h / 120–165 m. Power: 132 kW. Application: Ultra‑high pressure hydraulics, large compressor lube.
Large Bore (DN100/DN125/DN150 – Large Machines / Plant‑Wide Lube)
Lube Oil Pump 100-200 OH2 – DN100, 200mm impeller, very large flow. Capacity/Head: 120–220 m³/h / 45–70 m. Power: 75 kW. Application: Large power plant turbine lube, plant‑wide central supply main pump.
Lube Oil Pump 100-250 OH2 – DN100, 250mm impeller, very large flow medium pressure. Capacity/Head: 120–220 m³/h / 70–110 m. Power: 160 kW. Application: Marine propulsion lube, large refining unit machinery supply.
Lube Oil Pump 100-315 OH2 – DN100, 315mm impeller, very large flow high pressure. Capacity/Head: 120–220 m³/h / 115–160 m. Power: 250 kW. Application: Ultra‑large compressor lube, high‑pressure centralized lube main pump.
Lube Oil Pump 100-400 OH2 – DN100, 400mm impeller, very large flow ultra‑high head. Capacity/Head: 110–210 m³/h / 180–240 m. Power: 400 kW. Application: Long‑distance plant‑wide lube pipeline, ultra‑high pressure hydraulic station.
Lube Oil Pump 125-250 OH2 – DN125, 250mm impeller, giant flow. Capacity/Head: 200–350 m³/h / 65–100 m. Power: 200 kW. Application: Large industrial park centralized lube, million‑kW unit lube pump.
Lube Oil Pump 125-315 OH2 – DN125, 315mm impeller, giant flow high pressure. Capacity/Head: 200–350 m³/h / 110–155 m. Power: 315 kW. Application: Ultra‑large marine propulsion, multi‑national plant centralized lube main pump.
Lube Oil Pump 150-315 OH2 – DN150, 315mm impeller, extra‑large flow. Capacity/Head: 300–550 m³/h / 90–140 m. Power: 450 kW. Application: Global large power plant total lube system, ultra‑large industrial base supply.
Lube Oil Pump 150-400 OH2 – DN150, 400mm impeller, top large flow high pressure. Capacity/Head: 300–550 m³/h / 160–220 m. Power: 630 kW. Application: Ultra‑large hydraulic engineering system, global top refining base lube main pump.
6. Selection Notes (Lube Oil‑Specific)
Viscosity calculation: Select speed based on oil viscosity at ambient/operating temperature. For viscosity >500 mm²/s, prefer 1,450 rpm (low speed) with 15–20% motor power margin.
Shaft stiffness verification: Request SFI calculation report per API 610 Appendix K. SFI ≤0.35 for normal service to avoid seal wear from shaft deflection.
Cleanliness matching: For precision equipment (e.g., steam turbines), use stainless steel construction + 200‑mesh strainer to achieve NAS 6 or better cleanliness.
Seal flush plan: For high viscosity (>800 mm²/s) or high temperature (>120°C), recommend Plan 53B (external clean oil flush) to extend seal life.
Installation: Strictly follow API 610 OH2 mounting rules – no rear bearing housing bracket, allow pump to float freely with pipeline thermal expansion.
7. Contact Us
For detailed technical datasheets, model selection assistance (free selection report with oil viscosity, temperature, system pressure requirements), 3D models (STEP/IGES), certification documents (API 610, SFI test reports), and customized solutions (high‑viscosity special, food‑grade lube, low/high‑temperature versions), please contact:
Email: info@hyrig.com
Our engineering team responds within 24 hours with API 610 compliant solutions tailored to your lube oil and industrial lubrication needs.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.