1. Product Overview
The OH2 Series Thermal Oil Pump is a horizontal, single-stage, single-suction, overhung, centerline-mounted, radially split centrifugal pump, strictly designed and manufactured in accordance with API 610 (ISO 13709) international standards. It is purpose-built for high‑temperature thermal oil / heat transfer fluid applications (e.g., diphenyl, hydrogenated terphenyl, mineral thermal oil) in petrochemical, fine chemical, concentrated solar power (CSP), high‑temperature heating furnaces, and reactor heat exchange systems. Designed for continuous operation at 250°C to 450°C with an annual operation rate ≥99.7%, it is a critical equipment for high‑temperature heat transfer and thermal management.
Model Code Interpretation (OH2):
O = Overhung: Impeller outside bearing housing – compact structure, facilitates high‑temperature sealing and heat dissipation.
H = Horizontal: Horizontal mounting, compatible with thermal oil system layouts.
2 = 2nd Generation: Centerline support design – superior thermal stability for extreme temperature fluctuations.
2. Key Structural Features (High‑Temperature Specific)
Centerline Mounting + High‑Temperature Anti‑Distortion: Pump casing is cast steel / chrome‑moly steel, centerline‑mounted with minimal thermal deformation at 450°C. Shaft runout ≤0.02 mm, preventing seal leakage and rotor binding at high temperatures.
High‑Temperature Dedicated Sealing System: Standard API 682 Type 21/23 double mechanical seals. Friction pairs use silicon carbide + graphite, rated for 450°C. Equipped with Plan 54 forced cooling flush to isolate heat conduction – seal life ≥16,000 hours.
Forced Cooling Bearing Housing: Bearing housing with water cooling / air cooling fins, independent cooling chamber – oil temperature controlled ≤80°C. Heavy‑duty bearings with oil mist / oil bath lubrication – bearing life ≥30,000 hours.
High‑Temperature Rigid Rotor: Shaft material 42CrMo / 316Ti. Shaft flexibility index (SFI) calculated per API 610 Appendix K (SFI ≤0.3). High‑temperature deflection ≤0.05 mm – vibration resistant, anti‑bending.
Wide Flow Path + Anti‑Cavitation: Low specific speed, wide channel impeller, CFD‑optimized. NPSHr ≤3.0 m – adapted to thermal oil’s low viscosity (0.5–50 mm²/s) and cavitation‑prone nature at high temperature.
3. General Technical Specifications
| Parameter | Value |
|---|---|
| Capacity | 5 – 2,600 m³/h |
| Head | 30 – 360 m (max. 1,180 ft) |
| Operating Temperature | 250 – 450°C (standard 350°C) |
| Inlet Pressure | ≤0.5 MPa; Outlet Pressure ≤11.0 MPa |
| Media Viscosity (at high temp) | 0.5 – 50 mm²/s |
| Material Options | Carbon steel (WCB), Chrome‑moly steel (15CrMo), Stainless steel (316Ti) |
| Explosion Protection | Ex d IIB T3/T4 (Zone 1/2) |
| Speed | 50Hz: 1,450/2,900 rpm; 60Hz: 1,750/3,500 rpm (low speed for high viscosity start) |
| Flange Rating | Class 150/300/600# (RF, ASME B16.5) |
| Standards | API 610 12th, GB/T 3215 |
4. Global Equivalent Models (API 610 OH2 for Thermal Oil)
| Brand | Series / Models | Key Adaptation |
|---|---|---|
| Sulzer | OHH 25-200, 40-250, 80-400 | High‑temp heavy duty, 450°C rated – common in CSP plants |
| Flowserve | HPX 310, 410, 510 | Large flow high temp – refinery furnace standard |
| KSB | KZE‑HT (80-200, 100-315) | High efficiency, low noise – thermal oil boiler dedicated |
| Amarinth | OH2 custom | High‑alloy for aggressive thermal oils (chlorinated diphenyl) |
5. Complete OH2 Thermal Oil Pump Model Lineup (20 Core Models by Size)
Small Bore (DN40/DN50 – Small Flow, High‑Temp Circulation)
Thermal Oil Pump 40-250 OH2 – API 610 OH2, DN40 outlet, 250mm impeller. Capacity/Head: 25–50 m³/h / 80–110 m. Power: 18.5 kW. Application: Small heating furnace, lab heat exchange.
Thermal Oil Pump 50-160 OH2 – DN50, 160mm impeller. Capacity/Head: 30–60 m³/h / 35–50 m. Power: 11 kW. Application: Reactor small circulation, thermal oil boiler.
Thermal Oil Pump 50-200 OH2 – DN50, 200mm impeller. Capacity/Head: 30–65 m³/h / 50–70 m. Power: 15 kW. Application: Fine chemical heat exchange, small drying line.
Thermal Oil Pump 50-250 OH2 – DN50, 250mm impeller (high pressure). Capacity/Head: 30–65 m³/h / 80–115 m. Power: 22 kW. Application: High‑pressure small flow heating, high‑temp atomization.
Medium Bore (DN65/DN80 – Medium Flow, Mainstream Duty)
Thermal Oil Pump 65-160 OH2 – DN65, 160mm impeller. Capacity/Head: 50–100 m³/h / 32–48 m. Power: 18.5 kW. Application: Medium thermal oil boiler, shop heat exchange.
Thermal Oil Pump 65-200 OH2 – DN65, 200mm impeller. Capacity/Head: 50–110 m³/h / 48–72 m. Power: 30 kW. Application: Petrochemical heat exchange, reactor cluster feed.
Thermal Oil Pump 65-250 OH2 – DN65, 250mm impeller. Capacity/Head: 50–110 m³/h / 75–110 m. Power: 45 kW. Application: Long‑distance high‑temp pipeline, district heating.
Thermal Oil Pump 65-315 OH2 – DN65, 315mm impeller (high head). Capacity/Head: 45–100 m³/h / 120–160 m. Power: 75 kW. Application: High‑pressure heating system, concentrated solar power.
Thermal Oil Pump 80-160 OH2 – DN80, 160mm impeller. Capacity/Head: 80–160 m³/h / 30–48 m. Power: 37 kW. Application: Large thermal oil furnace, chemical park heat exchange.
Thermal Oil Pump 80-200 OH2 – DN80, 200mm impeller (main duty). Capacity/Head: 80–160 m³/h / 48–72 m. Power: 55 kW. Application: Refinery heating furnace, asphalt plant heating.
Thermal Oil Pump 80-250 OH2 – DN80, 250mm impeller. Capacity/Head: 80–160 m³/h / 75–115 m. Power: 90 kW. Application: High‑temperature reactor, synthetic material heating.
Thermal Oil Pump 80-315 OH2 – DN80, 315mm impeller (large flow high pressure). Capacity/Head: 75–150 m³/h / 120–165 m. Power: 132 kW. Application: Ultra‑high pressure heat exchange, CSP plant main pump.
Large Bore (DN100/DN125/DN150 – Large Flow, Industrial Scale)
Thermal Oil Pump 100-200 OH2 – DN100, 200mm impeller. Capacity/Head: 120–220 m³/h / 45–70 m. Power: 75 kW. Application: Large petrochemical heating system, plant‑wide heat exchange.
Thermal Oil Pump 100-250 OH2 – DN100, 250mm impeller. Capacity/Head: 120–220 m³/h / 70–110 m. Power: 160 kW. Application: CSP plant, large asphalt plant.
Thermal Oil Pump 100-315 OH2 – DN100, 315mm impeller (high pressure). Capacity/Head: 120–220 m³/h / 115–160 m. Power: 250 kW. Application: High‑temperature high‑pressure synthesis, coal chemical heat exchange.
Thermal Oil Pump 100-400 OH2 – DN100, 400mm impeller (ultra‑high head). Capacity/Head: 110–210 m³/h / 180–240 m. Power: 400 kW. Application: Ultra‑large CSP plant, cross‑regional heating.
Thermal Oil Pump 125-250 OH2 – DN125, 250mm impeller. Capacity/Head: 200–350 m³/h / 65–100 m. Power: 200 kW. Application: National chemical base, large refining & petrochemical plant.
Thermal Oil Pump 125-315 OH2 – DN125, 315mm impeller (giant flow high pressure). Capacity/Head: 200–350 m³/h / 110–155 m. Power: 315 kW. Application: Ultra‑large thermal oil boiler, CSP demonstration project.
Thermal Oil Pump 150-315 OH2 – DN150, 315mm impeller (extra‑large flow). Capacity/Head: 300–550 m³/h / 90–140 m. Power: 450 kW. Application: 10+ Mt/y refinery, large CSP plant.
Thermal Oil Pump 150-400 OH2 – DN150, 400mm impeller (top large flow high pressure). Capacity/Head: 300–550 m³/h / 160–220 m. Power: 630 kW. Application: Global top chemical base, ultra‑large heating network.
6. Selection Notes (Thermal Oil Specific)
Temperature grading: ≤300°C – carbon steel + Plan 52; 300–380°C – chrome‑moly steel + Plan 54; >380°C – 316Ti + forced cooling.
Cavitation control: High‑temp thermal oil is cavitation‑prone – ensure NPSHa ≥ NPSHr + 1.0 m; add inducer if necessary.
Power margin: Although viscosity is low at high temperature (high efficiency), starting torque is high – motor power margin ≥15%.
Seal flush: For ≥300°C, Plan 54 (external cooled oil flush) is mandatory – Plan 52 may cause coking.
Material selection: For sulfur‑containing thermal oil, use 316Ti; for standard oil, carbon steel / chrome‑moly steel.
7. Contact Us
For detailed technical datasheets, model selection assistance (free selection report with operating temperature, flow/head, system pressure), 3D models (STEP/IGES), certification documents (API 610, high‑temp testing), and customized solutions (higher temperature >450°C, special alloys, water‑cooled bearing options), please contact:
Email: info@hyrig.com
Our engineering team responds within 24 hours with API 610 compliant solutions tailored to your high‑temperature thermal oil and heat transfer needs.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.