Gardner Denver PZ‑10 / PZ‑11 FLUID END – OEM Part No. 202PZL029B (Studded Fluid Cylinder)

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
OEM Gardner Denver PZ-10/PZ-11 FLUID END: studded fluid cylinder 202PZL029B (single unit). Fully interchangeable between PZ-10 and PZ-11. 5000psi, functions as hydraulic cylinder / hydraulic box. Related parts: valve cover 200PZL147, seal 200PZL387, locking device 200PZL587, liners 204PZL456(5")/203PZL456(5.5")/202PZL456(6"), liner gasket 25AT37. NOT compatible with PZ-8/PZ-9 (205PZL029D). Email info@hyrig.com
Conatct For Details
DetailReview(0)Additional

The 202PZL029B is an original equipment manufacturer (OEM) FLUID END – a single, studded fluid cylinder that combines both suction and discharge functions in one housing with integrated studs for easy mounting. It is produced for the Gardner Denver PZ‑10 and PZ‑11 triplex mud pumps (both models share the same fluid end, fully interchangeable). Rated at 5,000 psi (34.3 MPa) , this FLUID END is designed for medium‑deep to deep wells (3,500–6,000 meters), conventional high‑pressure drilling, and land/offshore operations. It functions as both a hydraulic cylinder and a complete hydraulic box – three units are required per pump (one per cylinder, same part number).

Important Compatibility Note: This fluid end is NOT interchangeable with PZ‑8/PZ‑9 (which use 205PZL029D, rated 7,500 psi). Always verify pump model before ordering.

Key Specifications

ParameterGardner Denver PZ‑10 / PZ‑11 FLUID END
OEM Part No. (single studded fluid cylinder)202PZL029B (integral suction/discharge, with studs)
Pump ModelsGardner Denver PZ‑10, Gardner Denver PZ‑11 (fully interchangeable)
Pump ConfigurationTriplex pump – requires 3 x 202PZL029B per pump
Working Pressure5,000 psi (34.3 MPa)
Hydrostatic Test Pressure7,500 psi (51.7 MPa) – 1.5× rated
Max Liner IDUp to 6″ (152 mm) – see liners below
Valve TypeAccepts standard PZ‑10/PZ‑11 valve assemblies
MaterialHigh‑strength alloy forged steel, quenched and tempered
SealingAPI 5,000 psi rated flanges, metal‑to‑metal seals
ConfigurationIntegral suction/discharge with studded mounting
InterchangeabilityFully interchangeable between PZ‑10 and PZ‑11; not interchangeable with PZ‑8/PZ‑9
Operating Temperature-20°C to +120°C

Related Wear Parts & Consumables (OEM for PZ‑10/PZ‑11)

ComponentOEM Part No.Description
Valve Cover200PZL147High‑pressure valve cover for fluid end
Valve Cover Seal / O‑Ring200PZL387Seal ring for valve cover
Valve Cover Locking Device200PZL587Locking mechanism / retainer for valve cover
Liner (5″ / 127 mm)204PZL456Cylinder liner, 5″ ID
Liner (5½″ / 140 mm)203PZL456Cylinder liner, 5½″ ID
Liner (6″ / 152 mm)202PZL456Cylinder liner, 6″ ID
Liner Gasket / Seal25AT37Gasket for liner installation (common with PZ‑8/9)

Structural & Design Advantages – A Studded 5000psi FLUID END

  • Integral suction / discharge with studded design – The 202PZL029B combines both ports in a single forged body with factory‑installed studs, eliminating on‑site welding and reducing installation time.

  • Straight flow channels – Short, smooth passages minimize erosion and pressure loss.

  • Thick‑wall forged construction – Designed to withstand 5,000 psi cyclic service with high safety margin.

  • Metal‑to‑metal rigid seals – Valve cover (200PZL147) with seal (200PZL387) and locking device (200PZL587) ensures zero leakage under pressure.

  • Modular pump assembly – Three identical fluid cylinders per pump, simplifying spare parts inventory.

Why Choose This Gardner Denver PZ‑10/PZ‑11 FLUID END?

  1. OEM fit for two pump models – Exactly matches PZ‑10 and PZ‑11, eliminating compatibility concerns. Single part number for both.

  2. Studded for easier installation – Pre‑installed studs speed up mounting and reduce field fabrication.

  3. Forged 5,000 psi durability – High‑strength alloy forging resists fatigue, erosion, and corrosion.

  4. Complete OEM wear parts availability – Valve cover kit (200PZL147/200PZL387/200PZL587), multiple liner sizes (5″, 5½″, 6″), and gasket (25AT37) are readily available.

Applications – The Reliable FLUID END for PZ‑10/PZ‑11 Pumps

  • Gardner Denver PZ‑10 and PZ‑11 mud pumps – medium‑deep to deep wells (3,500–6,000 meters), high‑pressure drilling (≤5,000 psi), land and offshore rigs.

  • Suitable drilling environments – Conventional high‑pressure, high‑sand drilling fluids.

  • Compatible components – Pairs with valve assemblies, liners (204PZL456 / 203PZL456 / 202PZL456), valve cover kit (200PZL147/200PZL387/200PZL587), and liner gasket 25AT37.

Procurement & Replacement Notes

  • Order 202PZL029B for a single studded fluid cylinder – three units required per complete pump.

  • Order 200PZL147 (valve cover), 200PZL387 (seal), and 200PZL587 (locking device) for valve cover replacement.

  • Order liners by size: 204PZL456 (5″), 203PZL456 (5½″), or 202PZL456 (6″).

  • Order 25AT37 for liner sealing gasket.

  • Interchangeability warning – This fluid end is NOT interchangeable with PZ‑8/PZ‑9 (205PZL029D). Do not attempt to cross‑use.

  • Maintenance tips – Inspect valve cover seals (200PZL387) regularly. Replace locking devices if damaged. Perform magnetic particle inspection every 500 operating hours. Re‑tighten all fasteners to specified torque quarterly.

Contact for Genuine Gardner Denver PZ‑10/PZ‑11 FLUID END & Wear Parts

For pricing, technical datasheets, or ready stock of the Gardner Denver PZ‑10/PZ‑11 FLUID END (202PZL029B) and related wear parts (valve cover kit, liners, gasket), please email:

info@hyrig.com

OEM quality, global shipping. Complete FLUID END solutions for Gardner Denver PZ series, WIRTH TPK, IDECO T, OILWELL, National, BOMCO, LS, Honghua, EMSCO, and other pump models available.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit