The 1295240 (BL-1295240 – complete studded discharge module assembly with valves, seats, and seals) and 1295241 (BL-1295241 – single discharge module shell / cylinder body without valve internals) are original equipment manufacturer (OEM) FLUID END units produced by National Oilwell Varco (NOV) for the National 14P‑220 triplex mud pump (2200 HP, 14″ / 356 mm stroke). This FLUID END is engineered for ultra‑high pressure service at 7,500 psi (51.7 MPa) – a 50% increase over standard 5,000 psi fluid ends. Configured as a studded fluid end, it consists of a discharge module and a separate suction module (1295242). It functions as both a hydraulic cylinder and a complete hydraulic box, delivering extreme hydraulic power for ultra‑deep wells (7,000–9,000 meters), high‑pressure jet drilling, and demanding offshore operations. The pump assembly drawing number is 1295000.
Key Specifications
| Parameter | National 14P‑220 FLUID END (NOV) |
|---|---|
| OEM Part No. (complete studded discharge assembly) | 1295240 (BL-1295240) (includes valves, seats, seals) |
| OEM Part No. (single discharge module shell) | 1295241 (BL-1295241) (discharge module only, without valve internals) |
| OEM Part No. (suction module with studs) | 1295242 (complete suction module for 14P‑220) |
| Pump Model | National 14P‑220 (2200 HP, 14″ stroke, triplex) |
| Pump Drawing No. | 1295000 (complete pump assembly) |
| Working Pressure | 7,500 psi (51.7 MPa) – ultra‑high pressure |
| Hydrostatic Test Pressure | 11,250 psi (77.6 MPa) – 1.5× rated |
| Max Liner ID | 6½″ (165 mm) standard (1295165); other sizes available |
| Valve Type | API #8 high‑pressure suction & discharge valves (large bore for high flow) |
| Material | High‑strength alloy forged steel (equivalent to 42CrMo), quenched and tempered |
| Hardness (tempered) | 285–341 HB (upgraded for 7500psi service) |
| Sealing | API 7,500 psi rated flanges, metal‑to‑metal hard seal |
| Configuration | Studded fluid end – discharge module + suction module |
| Interchangeability | Three cylinders per pump; discharge modules fully interchangeable |
| Operating Temperature | -20°C to +130°C (upgraded for ultra‑deep well high temperature) |
Related Wear Parts & Consumables (OEM NOV for 14P‑220)
| Component | OEM Part No. | Description |
|---|---|---|
| Discharge Valve Assembly | 1295243 | Complete discharge valve (API #8) for 14P‑220 – 7500psi rated |
| Suction Valve Assembly | 1295244 | Complete suction valve (API #8) for 14P‑220 – 7500psi rated |
| Liner (standard 6½″) | 1295165 | High‑pressure cylinder liner, 6½″ (165 mm) ID – compatible with 7500psi |
| Valve Cover | 1295245 | Ultra‑high pressure valve cover / cylinder head for 14P‑220 fluid end |
| Wear Plate | 1295246 | Wear plate for fluid end protection – 7500psi service |
Structural & Design Advantages – An Ultra‑High Pressure Studded FLUID END for 14P‑220
Studded suction module design – Pre‑installed studs on suction module (1295242) allow direct bolt‑on connection to discharge module (1295240/1295241), eliminating on‑site welding and reducing installation time by over 50%.
Optimized high‑flow, high‑pressure channels – Short, large‑diameter flow passages designed for 7,500 psi cyclic service, minimizing erosion and pressure loss even at maximum flow rates.
Thick‑wall forged body – Critical wall thickness significantly increased compared to 5,000 psi fluid ends, resisting fatigue cracks under extreme pressure – essential for 7,000–9,000 meter ultra‑deep wells.
Heavy‑duty buttress thread cylinder head – Eliminates loosening under 7,500 psi and high vibration.
Metal‑to‑metal rigid high‑pressure seals – API‑rated flanges and valve covers ensure zero leakage under cyclic ultra‑high pressure.
Modular maintenance – Quick‑access valve covers (1295245) allow valve seat/insert replacement without disassembling the entire pump. Each hydraulic cylinder can be serviced independently, reducing downtime.
Why Choose This National 14P‑220 FLUID END?
OEM ultra‑high pressure fit – Exact NOV design for 14P‑220 at 7,500 psi. 100% dimensional and pressure match, eliminating assembly deviation, leakage, and vibration.
Forged ultra‑high pressure durability – High‑strength alloy forging + enhanced heat treatment (285–341 HB) resists erosion, corrosion, and fatigue in high‑sand, high‑temperature, ultra‑deep well conditions.
High‑flow, high‑pressure capability – Supports the extreme circulation rates required for high‑pressure jet drilling and extended‑reach wells.
Complete OEM wear parts availability – Full range of consumables (discharge valve 1295243, suction valve 1295244, liner 1295165, valve cover 1295245, wear plate 1295246) simplifies procurement.
Applications – The Flagship FLUID END for 14P‑220 Pumps
National 14P‑220 (NOV) mud pump – ultra‑deep wells (7,000–9,000 meters), high‑pressure jet drilling, extended‑reach horizontal wells, offshore platforms.
Suitable drilling environments – Ultra‑deep wells, high‑pressure (≤7,500 psi), high‑sand, high‑temperature (up to 130°C), high‑H₂S drilling fluids.
Compatible components – Pairs with API #8 valve assemblies (1295243 discharge / 1295244 suction), high‑pressure liner 1295165 (6½″), valve cover 1295245, wear plate 1295246, pistons, and piston rods as a complete ultra‑high pressure FLUID END system.
Procurement & Replacement Notes
Order 1295240 (BL-1295240) for the complete studded discharge module assembly (one hydraulic box / hydraulic cylinder with valves, seats, and seals). Order three units for a complete pump.
Order 1295241 (BL-1295241) for individual discharge module shells (cylinder body only, valve internals purchased separately).
Order 1295242 for the suction module (includes studs). Order one per discharge module.
Order 1295243 for discharge valve assemblies (API #8) and 1295244 for suction valve assemblies.
Order 1295165 for the standard 6½″ liner (specify other sizes if required).
Order 1295245 for valve covers and 1295246 for wear plates.
Interchangeability – This fluid end is specific to National 14P‑220. Not interchangeable with lower‑pressure models (10P‑130, 12P‑160) due to higher pressure rating, thicker walls, and API #8 valves.
Maintenance tips – Inspect ultra‑high pressure seals weekly. Replace valve assemblies every 500 operating hours for ultra‑deep well reliability. Check wear plate (1295246) for erosion during each maintenance cycle. Perform magnetic particle inspection after extended high‑pressure service. Re‑tighten cylinder head bolts to specified torque quarterly.
Contact for Genuine National 14P‑220 (NOV) FLUID END & Wear Parts
For pricing, technical datasheets, or ready stock of the National 14P‑220 FLUID END (1295240 / 1295241 / 1295242) and related wear parts (valve assemblies, liner, valve cover, wear plate), please email:
info@hyrig.com
OEM quality, global shipping. Complete FLUID END solutions for National 14P‑220, NOV 14‑P‑220, and other pump models available.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.