The Gardner Denver PZ-11 is a 1,600 HP (1,193 kW) triplex single-acting piston pump with a 7 inch x 11 inch (177.8 mm x 279.4 mm) bore and stroke configuration. Rated at 115 SPM, the PZ-11 is one of the most powerful models in the Gardner Denver PZ series, designed for continuous high-pressure drilling operations in deep well and ultra-deep well applications. The pump is available with two fluid end configurations: the standard L shaped fluid end and the 7500 PSI high-pressure fluid end. PZL99D designates the PZ-11 equipped with the 7500 PSI (51.7 MPa) high-pressure fluid end configuration, engineered for extreme-pressure drilling conditions requiring maximum discharge pressure and reliability.
The PZ-11 features a double-extended jackshaft for sheaves or sprockets, full roller bearings throughout the power end, and a rugged welded steel frame. The fluid end uses a modular studded design, allowing individual cylinder modules to be replaced without disturbing adjacent cylinders. The pump is widely used in deep well drilling, high-pressure operations, land and offshore rigs, and well service applications. Our Gardner Denver PZ-11 and PZL99D mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for Gardner Denver PZ-11 and PZL99D with OEM Part Numbers:
Cylinder Liners (General Service):
Liner 7 inch — OEM P/N: 200PZL456
Liner 6-1/2 inch — OEM P/N: 201PZL456
Liner 6 inch — OEM P/N: 202PZL456
Liner 5-1/2 inch — OEM P/N: 203PZL456
O-Ring for all liner sizes (7 inch, 6-1/2 inch, 6 inch, 5-1/2 inch) — OEM P/N: 25AH1
Liner Clamp — OEM P/N: 200PZL455
Liner Gasket to Cylinder — OEM P/N: 25AT37
Cylinder Liners (High Pressure Service):
Liner 6-1/2 inch — OEM P/N: 300PZL4055
Liner 6 inch — OEM P/N: 301PZL4055
Liner 5-1/2 inch — OEM P/N: 302PZL4055
Liner 5 inch — OEM P/N: 303PZL4055
Liner End Seal 6-1/2 inch — OEM P/N: 301PZL316
Liner End Seal 6 inch — OEM P/N: 303PZL316
Pistons and Rubber (General Service):
Piston Assembly 7 inch — OEM P/N: 202TBL045A
Piston Assembly 6-1/2 inch — OEM P/N: 201TBL045A
Piston Assembly 6 inch — OEM P/N: 245TBB045A
Piston Assembly 5-1/2 inch — OEM P/N: 243TBB045A
Pistons and Rubber (High Pressure Service):
Piston Assembly 6-1/2 inch — OEM P/N: 201TBL045A
Additional piston sizes available — consult factory for high-pressure service piston part numbers
Valve Assembly and Components:
Valve Seat, 4-Rib — OEM P/N: 200PZL039 (MK 61101507 or MK-7DD-B1) for PZ-8, PZ-9 and PZ-11
Valve Assembly, 4-Rib — OEM P/N: 200PZL482A (MK 60155041 or MK-U5C-EEF) for PZ-8, PZ-9 and PZ-11
Valve Spring — OEM P/N: 78H44 (steel-fitted center guided valve with polyurethane insert)
Valve Insert (Polyurethane) — OEM P/N: 201PZL106
Valve Fluid — OEM P/N: 202PZL482
Valve Seat — OEM P/N: 202PZL039
Valve Washer — OEM P/N: 201PZL279
Fluid End Modules and Accessories:
Complete Fluid End Assembly (L Shaped) — OEM P/N: 8477-A or A-8477-A
Discharge Module, Studded (Items 1–6) — OEM P/N: 8477-1 or A-8477-1
Suction Module, Studded (Items 6–7) — OEM P/N: 8477-2 or A-8477-2
Valve Cover — OEM P/N: 4475 or A-4475
Valve Cover Plug Assembly — OEM P/N: 4675-1A or A-4675-1A
Valve Guide Stud with Nut — OEM P/N: 4017-5 or A-4017-5
Valve Guide Insert — OEM P/N: 4018-34 or A-4018-34
Liner Retainer Flange — OEM P/N: 4700-I or A-4700-I
Wear Plate — OEM P/N: 8488-5 or A-8488-5
Wear Plate Seal — OEM P/N: 2930-08 or A-2930-08
Suction Module Dowel Pin — OEM P/N: 2988 or A-2988
Discharge Manifold Seal — OEM P/N: 25AL35 or A-25AL35
Threaded Flange — OEM P/N: 4575 or A-4575
Screw Gland — OEM P/N: 4675-1 or A-4675-1
7500 PSI Fluid End Components (PZL99D Configuration):
Complete Fluid End Assembly (7500 PSI) — OEM P/N: 8477-25A or A-8477-25A
Discharge Module, Studded (7500 PSI, Items 1–6) — OEM P/N: 8477-27 or A-8477-27
Suction Module, Studded (7500 PSI, Items 6–7) — OEM P/N: 8477-26 or A-8477-26
Valve Cover (7500 PSI) — OEM P/N: 4588-25 or A-4588-25
Valve Cover Flange — OEM P/N: 4488-25 or A-4488-25
Valve Cover Plug Assembly — OEM P/N: 4688-25A or A-4688-25A
Valve Cover Plug — OEM P/N: 4688-25 or A-4688-25
Liner Wear Plate — OEM P/N: 6577-25 or A-6577-25
Liner Retainer — OEM P/N: 4788-25R or A-4788-25R
Alignment Ring — OEM P/N: 4018-18 or A-4018-18
Rods and Related:
Piston Rod, General Service — OEM P/N: 200PZJ4065 (plunger coupling assembly with screws and locknuts)
Piston Rod, High Pressure Service — OEM P/N: 300PZL4065 (coupling-plunger assembly)
Piston Rod — OEM P/N: 301PZL060 or 302PZL060
Piston Rod Stud — OEM P/N: 300PZL110
Slide Crosshead — OEM P/N: 200PZL309
Frame and Miscellaneous:
Frame Assembly — OEM P/N: 200PZL001A
Crosshead Slide — OEM P/N: 200PZL309 (qty 6 per pump)
Crosshead Inspection Plate — OEM P/N: 200PZK052
Jackshaft — OEM P/N: 200PZK371
Jackshaft Key — OEM P/N: 200PZL062
Bearing Housing, Eccentric — OEM P/N: 201PZL006
Bearing Cover Plate, Rigid Side — OEM P/N: 200PZL315
Bearing Cover Plate, Floating Side — OEM P/N: 201PZL315
Materials and Construction:
Each Gardner Denver PZ-11 part is made from materials selected for demanding high-pressure drilling service. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, providing excellent abrasion resistance and working life of 800+ hours. Ceramic and zirconia liner options are available for extended service life in highly abrasive conditions. Pistons use high-strength steel cores with HNBR or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment; the 4-rib valve assembly (200PZL482A) features a steel-fitted center-guided design with polyurethane or carboxylated nitrile inserts. The fluid end modules are forged from high-strength alloy steel, quenched and tempered. The power frame uses welded steel construction with full roller bearings throughout. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our Gardner Denver PZ-11 and PZL99D mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The PZ-11 is a proven workhorse in the Gardner Denver PZ series, delivering 1,600 HP with a maximum working pressure of up to 7,500 PSI in the PZL99D high-pressure configuration. The double-extended jackshaft allows flexible drive arrangements. The modular fluid end design enables individual cylinder module replacement without disturbing adjacent cylinders, reducing downtime and maintenance costs. The PZ-11 shares numerous valve and fluid end components with the PZ-8, PZ-9, and PZ-10 models, simplifying inventory management and reducing spare parts costs. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for deep well drilling, ultra-deep well drilling, high-pressure drilling, land and offshore rigs, well service, workover operations, and industrial grouting. The PZL99D 7500 PSI configuration is specifically designed for extreme-pressure drilling conditions requiring maximum discharge pressure.
Compatibility:
All listed parts are direct replacements for Gardner Denver PZ-11 and PZL99D mud pump components. The PZ-11 shares valve assemblies (200PZL039, 200PZL482A) with the PZ-8, PZ-9, and PZ-10 models, and many fluid end components are interchangeable within the PZ series. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.