SPM TWS 600S Well Service Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
SPM TWS 600S triplex plunger pump parts and spares. Easy wearing parts include plungers 2.5 to 4.5 inch, valve assemblies, valve seats, valve springs, plunger packing assemblies, packing nuts, lantern rings, header rings, pressure rings, seals, and fluid end components. 600 BHP, 6 inch stroke, up to 20000 PSI. OEM part numbers listed. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The SPM TWS 600S is a 600 BHP (447 kW) triplex single-acting plunger pump manufactured by SPM Oil and Gas, a Caterpillar company. It features a 6 inch (152.4 mm) stroke, a maximum rod load of 100,000 lbs (43,360 kg), and a gear ratio of 4.61:1. The pump is designed for intermittent duty well service applications including acidizing, cementing, gravel packing, and snubbing operations. The TWS 600S is available with plunger diameters of 2.5 inch (63.5 mm), 2.75 inch (69.9 mm), 3 inch (76.2 mm), 3.5 inch (88.9 mm), 4 inch (101.6 mm), and 4.5 inch (114.3 mm). Maximum working pressure ranges from 20,372 PSI with a 2.5 inch plunger down to 6,288 PSI with a 4.5 inch plunger.

The TWS 600S features a patented offset crankshaft and crosshead design that greatly reduces the load on the crosshead and crosshead guide plates, as well as on the main roller bearings supporting the crankshaft. This offset design produces a smaller connecting rod angle during the power stroke, reducing wear between the crosshead and guide plates and extending product service life. The power frame is welded from high-strength steel plates. Retrofit kits are available for existing TWS 600S pumps, allowing customers to update their units to the latest HD technology without the capital investment of a completely new unit. Our SPM TWS 600S pump parts and spares are manufactured to OEM standards and are 100 percent directly interchangeable with original parts.

Easy Wearing Parts for SPM TWS 600S with OEM Part Numbers:

Plungers and Packing Components:

3 inch Plunger — OEM P/N: 2P103345

3.5 inch Plunger — OEM P/N: 2P103344

4.5 inch Plunger — OEM P/N: 3P100181

Plunger Stud — OEM P/N: 4P101714

Lantern Ring (3 inch) — OEM P/N: 3P107527

Header Ring (3 inch) — OEM P/N: P100332HP

Pressure Ring (3 inch) — OEM P/N: P100331HP

Seal Case (3 inch) — OEM P/N: 3P103524

Packing Nut (3 inch) — OEM P/N: 3P104709

Wiper Ring (3 inch) — OEM P/N: P102093HP

Plunger Packing Seal — OEM P/N: 3A104769HP

Plunger Small Packing Seal — OEM P/N: 3A107009HP

Packing Assembly Complete 4.5 inch — OEM P/N: 3A105263HP

Packing Nut with W-For — OEM P/N: 3P100178G

Valve Assembly and Components:

Valve with Insert 3.5 inch and 4.5 inch — OEM P/N: 2A109537PP

Valve Complete (3 inch) — OEM P/N: 2A109608PP

Valve Seat (3 inch) — OEM P/N: 2A109605PP

Seat Seal (3 inch) — OEM P/N: P104289

Valve Insert (3 inch) — OEM P/N: 2P110355

Valve Spring — OEM P/N: 4P104721

Valve Spring (3.5 inch to 4.5 inch fluid end) — OEM P/N: 4P100198

Suction Valve Stop (3 inch) — OEM P/N: 3P101634

Suction Valve Stop (3.5 inch to 4.5 inch fluid end) — OEM P/N: 3P100176

Retainer Nut — OEM P/N: 3P104723

Adapter — OEM P/N: P107614

Fluid End and Pressure Components:

Fluid End (3 inch) — OEM P/N: 1P104705

Fluid End (3.5 inch) — OEM P/N: 1P102978

Lower Suction Cover — OEM P/N: 3P104710

Upper Suction Cover — OEM P/N: 2P104711

Suction Cover — OEM P/N: 3P104373LT

Discharge Cover — OEM P/N: 3P105149LT

Discharge Cover with 2 inch 1502 F — OEM P/N: 2P103069

Discharge Flange (3 inch) — OEM P/N: 3P100182

Seals and O-Rings:

Upper and Lower Suction Cover Polyurethane Seal — OEM P/N: P105095

Upper and Lower Suction Cover D-Shape Seal — OEM P/N: P109313

Small Fluoroplastic Sealing Ring — OEM P/N: P103576

Large Fluoroplastic Sealing Ring — OEM P/N: P103370

Large Sealing Ring — OEM P/N: P103368

Small Sealing Ring — OEM P/N: P18481

End Sealing Ring Discharge Flange — OEM P/N: P109509

D-Shape Sealing Ring Discharge Flange — OEM P/N: P109509

2 inch End Seal for HP Mains — OEM P/N: 4P10229

Fasteners and Related:

Plunger Pin — OEM P/N: 4P101714

Retainer Nut for Pressure Gage — OEM P/N: 2P104719

Discharge Flange Stud 1-8 UNC x 3.5 inch — OEM P/N: P14896

Nut 1-8 UNC — OEM P/N: P14897

Back Up Stuffing Box — OEM P/N: 2P107195

Materials and Construction:

Each SPM TWS 600S part is made from materials selected for demanding well service operations. Fluid end blocks are available in alloy steel (30CrNi2.5Mo) or stainless steel configurations, quenched and tempered for high-pressure service. Valve seats use 8620H or 20CrMo alloy steel with advanced heat treatment. Valve inserts are available in TPU (urethane) or HNBR for reliable sealing under high-pressure fracturing conditions. Plungers use 40Cr steel with hardened surfaces for wear resistance. Packing components use a combination of NBR, HNBR, and urethane materials selected for compatibility with acid, frac, and standard well service fluids. All parts are precision machined to OEM standards for 100 percent interchangeability.

Key Performance Advantages:

Our SPM TWS 600S pump parts and spares offer high wear resistance, reliable sealing, and long service life. The TWS 600S features a unique offset crankshaft and crosshead design that reduces crosshead and guide plate loading, decreasing wear and extending component life. The pump is rated for 600 BHP with a maximum rod load of 100,000 lbs, delivering reliable performance for intermittent duty well service applications. The TWS 600S HD configuration provides 6 percent higher rod load at pressures of 15,000 PSI with a 3 inch plunger and 20,000 PSI with a 2.5 inch plunger. All fluid end parts are 100 percent interchangeable with OEM originals, simplifying inventory and reducing downtime.

Applications:

These parts are suitable for oilfield acidizing, cementing, gravel packing, snubbing operations, fracturing, and other well service applications. The TWS 600S is also compatible with TPD 600, TPB 600, TPC 600, and STP 600 pump models.

Compatibility:

All listed parts are direct replacements for SPM TWS 600S triplex plunger pump components. The TWS 600S fluid end is 100 percent compatible with the dominant TWS600 pumps in the worldwide market. Parts are also interchangeable with Serva TPA600, TPA-400, TPB-600, Halliburton HT-400, and Gardner Denver GD-2500 pump components where noted. No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit