GN GNZJW Desander & Desilter | Hydrocyclone Separators

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG supplies the GN GNZJW Desander and Desilter and replacement parts. These units are economical choices for small footprint applications, removing solids without a downstream drying shaker.
Conatct For Details
DetailReview(0)Additional

GN GNZJW Desander & Desilter | Hydrocyclone Separators

Overview:

HYRIG supplies the GN GNZJW Desander and Desilter and replacement parts. These units are economical choices for small footprint applications, removing solids without a downstream drying shaker.

Key Specifications & Model Comparison

ModelGNZJW-2SJGNZJW-3SJGNZJW-12NJGNZJW-16NJ
Capacity240 m³/h360 m³/h≤240 m³/h≤360 m³/h
Cone Type10" x 210" x 34" x 124" x 16
Working Pressure0.25~0.4 MPa0.25~0.4 MPa0.25~0.4 MPa0.25~0.4 MPa
Weight475 kg523 kg450 kg469 kg

Data source: Technical data table.

Structure / Working Principle

Mud is pumped into the hydrocyclones under pressure. The centrifugal force separates the heavier solids, which are discharged from the bottom, while the clean mud exits from the top. These units do not have a bottom shaker.

Applications

Used in GN Drilling Rig Solids Control Systems for small rigs, CBM drilling, HDD, and water well drilling.

Spare Parts

HYRIG provides a full range of replacement parts and wear components, including polyurethane cones and apexes.

Specifications:

  • Desander Cut Point: +40 Microns
  • Desilter Cut Point: +20 Microns
  • Models: GNZJW-2SJ, GNZJW-3SJ (Desander); GNZJW-12NJ, GNZJW-16NJ (Desilter)
  • Feature: Small footprint, no consumable screens

Contact Us:

For GN GNZJW Desander and Desilter selection and spare parts, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit