HYRIG is a professional API 610 pump manufacturer offering a full range of water injection pumps for both topside (Platform or FPSO based) and subsea water injection applications to boost oil recovery from maturing subsea fields.
Ultra-high pressure injection – HYRIG BB5 barrel pumps are engineered for the most demanding waterflood and water injection duties (pressures up to 1,100 bar / 16,000 psi , heads up to 10,200 m / 33,500 ft).
API 610 BB5 design – Radially split barrel casing, between‑bearings, multistage. Designed to ISO 13709 / API 610 Type BB5.
High reliability in continuous service – Opposed impeller configuration (back‑to‑back) eliminates a balance drum, reducing wear and extending maintainance intervals.
Multiple barrel construction options – Forged carbon steel, duplex stainless steel, HIP'd and overlaid barrel construction for sour service and corrosive seawater injection.
Broad hydraulic coverage – Capacities up to 4,000 m³/h (20,000 US gpm), heads up to 10,200 m (33,500 ft), pressures up to 1,100 bar (16,000 psi), temperatures up to 200°C (400°F).
Bearing arrangement – Sleeve, pocketed, or tilt pad bearings, with pure oil mist lubrication.
High stability rotor – Inline or back‑to‑back rotor stack designs for rotor‑dynamic stability.
Barrel closure – Twist lock or bolted barrel closure with SuperNutsTM for safe operation and simplified maintenance.
Testing facility – HYRIG owns a high‑power pump test facility (up to 60 MW driven by gas turbine) to witness full‑load performance.
HPcp Alternative
The HYRIG BB5 is a proven high pressure barrel casing pump for water injection, offshore crude oil shipping, and remote pipeline services. It offers the same level of performance and reliability as the industry-leading HPcp, with more competitive lead times and flexible commercial terms.
Waterflood for Enhanced Oil Recovery (EOR) – Inject treated seawater or produced water into the aquifer formation to maintain reservoir pressure and drive oil toward production risers.
e.g. HPcp class pumps for FPSO in Brazil and Guyana.
Crude oil shipping on remote offshore platforms – Move crude oil from platforms to onshore storage with high differential pressure.
Onshore remote pipelines – Pump hydrocarbons through mountainous terrain where all pressure rise must be made by a single station.
Seawater treatment & reinjection – Pre‑treated seawater injection to remove salt content before downhole disposal.
| Parameter | HYRIG BB5 (Standard) | HYRIG BB5 (High Pressure) |
|---|---|---|
| Capacity (Q) | Up to 4,000 m³/h (20,000 US gpm) | Up to 3,000 m³/h |
| Head (H) | Up to 10,200 m (33,500 ft) | Up to 7,000 m |
| Pressure | Up to 1,100 bar (16,000 psi) | Up to 700 bar |
| Max temperature | Up to 200°C (400°F) | Up to 180°C |
| Max speed | Up to 8,850 rpm | Up to 7,200 rpm |
| Frame sizes | Discharge up to 500 mm / 20 in | Discharge up to 350 mm |
| Number of stages | Up to 12 (back‑to‑back) | Up to 8 |
API 610 / ISO 13709 compliance – Full compliance with the latest edition of API 610.
Track record – Hundreds of HYRIG high-pressure BB5 pumps are currently running offshore in critical water injection services (North Sea, South America and Southeast Asia).
More HPcp‑class pumps delivered > 600 bar than many competitors.
Shorter lead time – Standard barrel pumps delivered in 30–38 weeks; expedited options available.
Lower total cost of ownership – Competitive upfront cost combined with high reliability and low maintenance.
Global service support – HYRIG service centers in Houston, Rotterdam, Dubai and Singapore; spares shipped within 24 hours for critical breakdowns.
Provide the following data to HYRIG for proper selection:
Water source (treated seawater, produced water, aquifer water)
Sour service requirement (H₂S content)
Injection pressure required (bar / psi) — determines BB5 vs OH2/BB1
Flow rate required (m³/h or US gpm)
Sand / solids content (ppm and particle size)
NPSHa available
Installation type (onshore / topside FPSO / subsea)
HYRIG will recommend the most economical and reliable API 610 pump type (BB5 barrel, BB2 axially split, OH2 overhung, or VS4 vertical) with the correct metallurgy, seal plan, and driver.
*For a quotation or technical discussion on water injection pumps (API 610 BB5 / BB2 / OH2 / VS), please email us:*
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.