A water injection pump is critical for oilfield secondary recovery (waterflooding) and produced water reinjection. It requires high pressure (up to 450 bar), high reliability, and long continuous duty. As a professional China API 610 manufacturer, we supply three main pump types – BB5, OH2, and VS – to meet different water injection scenarios. All designs fully comply with API 610 11th/12th edition (ISO 13709) .
Structure: Radially split barrel, multistage, between‑bearings (BB5).
Best for: High pressure water injection (up to 450 bar / 6500 psi), deep well injection, long-distance water transfer.
Key features:
Multistage impellers (3‑10 stages) achieve heads up to 4000 m.
Barrel casing safely contains extreme pressure – no split flange leaks.
Between‑bearings rotor for stability at high speeds.
Hardened 12% chrome or duplex stainless steel for corrosion/erosion resistance.
API 682 Plan 23/31/32 seals with external flush if sand/solids present.
Typical duties:
Onshore high‑pressure waterflood (200‑450 bar).
Produced water reinjection (high TDS, H₂S).
Deep aquifer injection.
Structure: Horizontal, single‑stage, overhung (OH2) with foot‑mounted casing, back pull‑out.
Best for: Moderate pressure water injection (up to 20 bar / 200 m head), low to medium flow, low cost.
Key features:
Single‑stage, high efficiency for clean water.
Back pull‑out maintenance without disturbing piping.
Optional inducer for low NPSH.
Materials: 316SS, duplex, or carbon steel with epoxy coating.
Single or double mechanical seals (Plan 11/Plan 53A).
Typical duties:
Low pressure waterflood (<20 bar).
Booster pump for main injection line.
Smaller water injection projects (onshore/offshore).
Structure: Vertical, single‑casing, rigid shaft (VS4) or lineshaft (VS1/VS5).
Best for: Suction from tanks, sumps, or caissons where horizontal pumps cannot be placed or NPSH is low.
Key features:
Flooded suction – no priming required.
Small footprint – ideal for offshore platforms.
Column lengths customised to tank/pit depth.
Materials: 316SS, duplex, or bronze for seawater.
No bottom seal – motor above liquid.
Typical duties:
Seawater injection intake (from caisson or sump).
Produced water pit transfer.
Low NPSH water sources.
| Feature | BB5 (Barrel) | OH2 (Overhung) | VS (Vertical) |
|---|---|---|---|
| Max discharge pressure | Up to 450 bar | Up to 20 bar (200 m head) | Up to 50 bar |
| Flow range | 30 – 3000 m³/h | 5 – 1500 m³/h | 10 – 5000 m³/h |
| Head range | 200 – 4000 m | Up to 200 m | Up to 150 m |
| NPSH requirement | Moderate (inducer optional) | Low to moderate | Very low (submerged) |
| Footprint | Large | Large | Small (vertical) |
| Complexity | High | Moderate | Moderate |
| Best for | High pressure, deep reinjection | Low‑mid pressure, above ground | Pit/sump suction, low NPSH |
Full API 610 compliance – Types BB5, OH2, VS verified. Performance test, NPSH test, 4‑hour mechanical run test with vibration monitoring.
Wide pressure range – From 10 bar to 450 bar, one supplier covers all water injection duties.
Corrosion resistant materials – Duplex, super duplex, 316SS, or high chrome for abrasive/saline water.
NACE MR0175 compliance – For H₂S‑laden produced water.
Short lead time – Standard pump sizes available from stock; custom designs 20‑36 weeks.
Global spare parts support – Impellers, shafts, wear rings, seal cartridges, barrels (BB5) or columns (VS) shipped worldwide.
Quality assurance
ISO 9001:2015 certified.
API 610 witnessed performance test available.
Hydrostatic test of all pressure‑containing parts.
Material traceability EN 10204 3.1 / 3.2.
NDE – MT, PT, UT, RT as required.
Rotor dynamic analysis for high speed BB5 pumps.
How to specify your water injection pump
Please provide: flow (m³/h), required discharge pressure (bar) or head (m), water source (fresh, produced, seawater), H₂S content (ppm), solids (sand) content and size, temperature (°C), NPSHa (m), installation type (above ground / pit / sump). We will recommend the correct API 610 type (BB5, OH2, or VS), material class, seal plan, and driver details.
Contact us
For a quotation or technical discussion on API 610 water injection pumps (BB5 / OH2 / VS) from our China factory:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.