| Model | Max Pressure Setting | Drain Port | Switching Frequency | Electrical Options |
|---|---|---|---|---|
| HED1 | 50 MPa | Yes | Up to 300 cycles/min | LED (24V, 110V, 220V) |
| HED10 | 35 MPa | No | Up to 50 cycles/min | LED (24V, 110V, 220V) |
Data source: Technical data table.
Text-based mounting parameters for the HED1/HED10:
| Parameter | Specification |
|---|---|
| Body Width | 44 mm |
| Body Height | 178 mm |
| Thread Connection | M14x1.5 |
| Weight | Approx. 1.2 kg |
When the system pressure reaches the set spring force, the plunger moves and actuates the microswitch, sending an electrical signal. The switching pressure can be adjusted by changing the internal spring compression.
`HED1/HED10` + `A` + `40` + `Pressure Range (100/350/500)` + `LED Option (L24/L110/L220)`.
Used for safety interlocks, sequence control, and system pressure monitoring in hydraulic power units and machine tools.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing the pressure range or LED voltage? Contact our engineers with your system specifications.
Q: What is the difference between HED1 and HED10?
A: HED1 has a drain port to prevent backpressure from affecting the pressure setting, while HED10 does not.
Q: What is the electrical contact rating?
A: The contacts are rated for 460V AC at 15A, or 40V DC at 1.0A.
Q: Can I adjust the switching pressure?
A: Yes, the switching pressure can be adjusted by changing the internal spring compression.
For HED1 and HED10 pressure switch selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.