| Model | Max Pressure Setting | Mounting Types | Switching Precision | Contacts |
|---|---|---|---|---|
| HED40 | 35 MPa | Pipe / Subplate / Sandwich | ±1% | AC 250V/5A, DC 50V/1A |
Data source: Technical data table.
Text-based mounting parameters for the HED40:
| Parameter | Specification |
|---|---|
| Body Width | 40 mm |
| Body Length | 123 mm (max) |
| Thread Connection | M14x1.5 (Pipe type) |
| Weight | Approx. 0.6 kg |
The HED40 uses a plunger that acts on a microswitch. The spring compression can be adjusted using a set screw. The mechanical stop protects the relay from overpressure damage.
`HED40` + `Mounting (P/A/H)` + `15` + `Pressure Range (50/100/350)` + `Z14` + `LED (L24/L110/L220)` + `S (With Cap)`.
Used in hydraulic systems where compact pressure monitoring is required, such as mobile hydraulics and modular manifold systems.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need help choosing the mounting type or pressure range? Contact our engineers with your system specifications.
Q: What are the mounting options for the HED40?
A: It can be mounted on a subplate (P), directly in a pipe (A), or as a vertical sandwich component (H).
Q: What is the maximum pressure setting?
A: The HED40 can be set up to a maximum of 35 MPa.
Q: Does the relay require a drain line?
A: No, the HED40 does not require a drain line, unlike the HED1 model.
For HED40 pressure switch selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.