The Halliburton HT-400 is a horizontal triplex single-acting plunger pump rated at 400–600 BHP (298–447 kW) with a nominal rating of 800 hydraulic horsepower (hhp). It features an 8-inch (203.2 mm) stroke, a maximum input torque of 9,782 N·m, a gear ratio of 8.6:1, and a pump weight of approximately 6,500 lbs. The pump handles various well service applications including acidizing, cementing, fracturing, and gravel packing, with pressure capabilities up to 20,000 PSI (1,379 bar) and pump rates up to 19 barrels per minute. Fluid end plunger sizes available: 3-3/8 inch (85.7 mm), 4 inch (101.6 mm), 4-1/2 inch (114.3 mm), 5 inch (127.0 mm), and 6 inch. The compact and lightweight design allows airlifting into remote areas. All our HT-400 parts are manufactured to OEM standards and are 100% directly interchangeable with original parts, requiring no modification for installation.
Easy Wearing Parts for HT-400 with OEM Part Numbers:
Plungers and Packing:
Plunger, Hard Surface — OEM P/N: 316.23085
Plunger Nose — OEM P/N: 316.2331
Plunger Nose Seal Assembly — OEM P/N: 316.2330
Plunger Packing Gland — OEM P/N: 316.23001
Packing Subassembly for 4.5 inch Plunger — includes Adapter Header 316.23503, Ring Header 316.23501, Packing Set 316.23525, Backup Ring 316.23393, Seal and Packing Carrier 316.23396, Lube Seal 316.23395, O-Ring 83.4049
Valve Assembly and Components:
Valve, HT-400 Frac — OEM P/N: 316.22048 (4.5 inch), 316.21007 (3-3/8 and 4 inch)
Valve Seat, Tapered — OEM P/N: 316.22047 (4.5 inch), 316.21008 / 100002825 (3-3/8 and 4 inch), 100002957 (5.0 and 6.0 inch)
Valve Spring — OEM P/N: 316.2308 (25–36 lb/in), 316.27259 (SAP 100058597)
Valve Insert, Urethane, Acid/Frac Service (Yellow) — OEM P/N: 316.22046 (4.5 inch), 316.21048
Valve Insert, Urethane, Standard Service (Brown) — OEM P/N: 316.22049 (4.5 inch), 316.21006
Retainer, Cover — OEM P/N: 316.2102 (3-3/8 inch), 316.2202 (4 and 4.5 inch)
Cover, Discharge, Double Guided Valve — OEM P/N: 316.2107 (3-3/8 inch), 316.23091 (4 and 4.5 inch)
Gasket, Discharge Valve and Cylinder Head Cover — OEM P/N: 316.21052 (3-3/8 inch), 316.22052 (4 and 4.5 inch)
Ring, Spacer, Discharge Valve and Cylinder Head Cover — OEM P/N: 316.21051 (3-3/8 inch), 316.22051 (4 and 4.5 inch)
Bushings and Guides:
Liner, Two Piece Bushing, Valve Guide, Brass — OEM P/N: 316.22005
Insert, Two Piece Bushing, Valve Guide, Special — OEM P/N: 316.22004
Retainer, Guide Bushing — OEM P/N: 316.23953
Suction Valve Components:
Retainer, Stop and Spring, No. 4 Suction Valve — OEM P/N: 316.23034
Boot, Suction and Stop — OEM P/N: 316.25233
Spring, Lock, Suction Stop — OEM P/N: 316.22252
Spring, Valve, No. 4, 4.5 inch, 25 lb/in — OEM P/N: 316.2308
Push Rod and Seals:
Retainer, Push Rod, Two Piece Nose, L-Spacer — OEM P/N: 316.21066
Push Rod, Two Piece, L-Spacer — OEM P/N: 316.21065
Tie Rod, Push Rod, L-Spacer — OEM P/N: 316.25166
Housing, Push Rod Seal, Floating, L-2 Spacer — OEM P/N: 316.10013
Seal, Push Rod, L-Spacer — OEM P/N: 316.10014
O-Ring, 90 Duro, 1-7/8 × 1-5/8 × 1/8 — OEM P/N: 8.34020
O-Ring, 70 Duro, 5-11/16 × 5-1/2 × 3/32 — OEM P/N: 70.33739
O-Ring, 90 Duro, 4-1/2 × 4-1/4 × 1/8 — OEM P/N: 8.34041
Fluid End Components:
Fluid End Section, Not Sleeved — OEM P/N: 316.23951
Flange, Discharge, BLANK — OEM P/N: 316.22980
Flange, Discharge, CURVED, Right Hand — OEM P/N: 316.23019
Flange, Discharge, CURVED, Left Hand — OEM P/N: 316.23017
Seal, Discharge Passage — OEM P/N: 316.2547
Cylinder Head Cover — OEM P/N: 316.2207
Cylinder Head Cover Retainer — OEM P/N: 316.2202
Materials and Construction:
Each HT-400 part is made from materials selected for demanding high-pressure well service. Valve springs use premium chrome-vanadium alloy spring steel with precise tempering and stress relief heat treatment, delivering ultra-high fatigue resistance and stable elastic performance under extreme high-pressure, sand-containing fracturing conditions. Plungers use hardened surfaces for wear resistance. Valve bodies and seats use alloy steel with advanced heat treatment. Bushings use brass construction. Seals use NBR, HNBR, or urethane compounds suitable for acid, frac, and standard service. All parts are precision machined to OEM standards for 100% interchangeability.
Key Performance Advantages:
Our HT-400 pump parts and spares offer high wear resistance, reliable sealing, and long service life. The valve spring quickly and tightly resets the valve to prevent fluid backflow, stabilize pump working pressure, and ensure consistent displacement efficiency. All dimensions are strictly manufactured in accordance with OEM standards, achieving 100% direct interchangeability with original parts. No modification is required for installation, simplifying on-site maintenance and reducing pump downtime. Parts are compatible with water-based, oil-based, and synthetic service fluids.
Applications:
These parts are suitable for oilfield fracturing, cementing, acidizing, gravel packing, cuttings injection, and other well service operations. The HT-400 pump is ideal for remote areas due to its compact and lightweight design.
Compatibility:
All listed parts are direct replacements for Halliburton HT-400 triplex plunger pump components. Parts are also compatible with SERVA TPH400 and SPM HT-400 models. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.