HYRIG can supply hydraulic check valves designed for motor circuits. These valves prevent fluid backflow and protect the motor from cavitation damage, ensuring stable and reliable operation.
The check valve is a crucial component for maintaining hydraulic system integrity. By allowing fluid to flow in only one direction, it prevents reverse rotation and cavitation, particularly in applications involving sudden load changes or deceleration.
Data source: Technical data table
| Parameter | Available Options |
|---|---|
| Series | 48 Series |
| Motor Compatibility | BM1, BM2, BM5 |
| Port Sizes | 2-7/8-14UNF, 2-1/2-14NPTF |
| Cracking Pressure | 210 Bar or 160 Bar |
| Flow Capacity | 60 LPM or 98 LPM |
| Overflow Type | Type A or Type B |
The check valve is designed to mount directly onto the motor port face or integrate into the hydraulic line.
| Dimension Item | Standard Value |
|---|---|
| Mounting Interface | Direct motor mount |
| Port Connections | SAE or NPTF |
| Seal Type | O-ring seals included |
When replacing a check valve, verify:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which check valve configuration fits your motor? Tell us your motor model and flow requirements, and our engineers will provide the correct part number.
Q: What is the purpose of a check valve in a motor circuit?
It prevents hydraulic fluid from flowing backward, which can cause cavitation and damage to the motor, especially during sudden stops or load reversals.
Q: How do I determine the correct cracking pressure?
The cracking pressure should be selected based on the maximum back pressure expected in your return line and the specific requirements of your motor circuit.
For hydraulic check valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.