HYRIG can supply motor speed sensors designed for hydraulic motors. This sensor provides a standard voltage signal to indicate motor speed, featuring high accuracy and easy installation.
The speed sensor is designed to monitor the rotational speed of hydraulic motors, providing feedback for control systems. With a robust design and standard M12 connector, it is easy to install and replace, making it a reliable choice for various hydraulic applications.
Data source: Technical data table
| Parameter | Value |
|---|---|
| Operating Voltage Range | 4.5 - 24 VDC |
| Operating Temperature | -20 to 80 °C |
| Operating Frequency Range | 0 - 10 KHz |
| Max Sink Current | 0 - 20 mA |
| Sensor Output | 30 Pulses per revolution |
| Output Type | NPN: Open Collector |
| Connection | 4 Pin Polarized, M12 |
The sensor is designed to mount directly onto the motor housing. The connector is a standard M12 male connector.
| Dimension Item | Standard Value |
|---|---|
| Connector Type | M12 Connector (Male) |
| Pin Configuration | 1: (+), 2: N/C, 3: (-), 4: Output |
| Mounting | Direct motor mount |
When replacing a speed sensor, verify:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if this speed sensor is compatible with your motor? Tell us your motor model and control system requirements, and our engineers will confirm the correct sensor.
Q: What is the output signal type of this sensor?
The sensor provides an NPN open collector output with a standard voltage signal.
Q: How many pulses per revolution does the sensor provide?
The sensor provides 30 pulses per revolution, which can be doubled electronically for higher resolution.
For motor speed sensor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.