HYRIG can supply the ZD series hydraulic brakes, including ZD 80 and ZD 100. These multi-disc brakes are designed for heavy-load machines and can be independently used without motors.
The ZD series hydraulic brakes are widely applied in heavy-load machines such as engineering machines, cranes, agricultural machines, and environmental sanitation machines. With a multi-disc brake design, they offer excellent performance, compact design, low noise, and easy operation and installation.
Data source: Technical data table
| Item | ZD 80 | ZD 100 |
|---|---|---|
| Min Static Torque (N·m) | 450 | 550 |
| Min Opening Pressure (MPa) | 2.5 | 2.5 |
| Max Opening Pressure (MPa) | 30 | 30 |
| Min Oil Quantity for Brake Releasing (cm³) | 7-8 | 7-8 |
| Oil Volume (cm³) | 50-120 | 50-120 |
| Max Pressure in Drain Space (MPa) | 0.05 | 0.05 |
The brake features a compact design with standard mounting flanges for easy integration.
| Dimension Item | Standard Value |
|---|---|
| Drain Port | G1/4 |
| Brake Release Port | G1/4 |
| Mounting Flange | Standard ZD flange |
When replacing a ZD brake, verify:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure which ZD brake model fits your application? Tell us your required holding torque and mounting dimensions, and our engineers will confirm the correct model.
Q: Can the ZD brake be used without a hydraulic motor?
Yes, the ZD hydraulic brakes can be independently used without motors.
Q: What is the maximum release pressure for the ZD brake?
The maximum opening pressure for the ZD series is 30 MPa.
For ZD hydraulic brake selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.