| Parameter | Value |
|---|---|
| Series | 451 Series |
| Setting Mechanism | Hydraulic |
| Application | Deep and highly deviated wells |
| Seals | Premium cylinder seals for HP/HT |
| Bypass | Multi-cone design for excellent fluid bypass |
| Load Capacity | Medium to heavy |
| Liner Size Range | 3-1/2" to 10-3/4" (confirm size) |
| Connection Types | API and Premium threads |
Data source: Technical data table.
The 451 Series is dimensioned to match the specific liner size and parent casing. The hydraulic cylinder and slips are designed to maximize bypass area while maintaining high load capacity.
| Liner Size | Parent Casing | Max OD | Setting Pressure |
|---|---|---|---|
| Contact for exact size | Contact for exact size | Matched to casing ID | Calculated based on well conditions |
Specific dimensions and load ratings are confirmed against the selected liner and casing program at order.
The 451 Series operates on a hydraulic setting principle:
Upgrading from a mechanical to a hydraulic hanger?
For lower-cost vertical applications, see the Mechanical Liner Hanger in the Liner Hanger Series.
Disclaimer: This equipment is designed for heavy-duty lifting and high-pressure cementing applications. Ensure strict compliance with local safety standards and verify load and pressure ratings prior to installation.
Need to determine the setting pressure or the required slip configuration for your liner weight? Send us your well plan and liner specifications, and our engineers will provide the necessary calculations.
Q: Does the 451 Series require pipe rotation to set?
A: No. The 451 is set hydraulically by applying pressure through the run-in string, eliminating the need for rotation.
Q: How is the hydraulic pressure applied?
A: A setting ball is dropped and circulated to a ball seat. Pump pressure is then applied to actuate the hydraulic cylinder and set the slips.
Q: What type of wells is this hanger best suited for?
A: It is specifically designed for deep and highly deviated wells where mechanical-actuated hangers may not be preferred or where rotation is difficult.
Q: What is the typical lead time?
A: Standard lead time is 6-8 weeks due to complex assembly and factory testing. Please contact us for urgent scheduling.
For 451 Series Hydraulic Liner Hanger selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.