| Series | Setting Method | Best For | Key Feature |
|---|---|---|---|
| Mechanical | Right/Left Hand Rotation | Vertical / Low deviation | Economical, multi-cone design |
| 451 Hydraulic | Hydraulic Pressure | Deep / High deviation | No rotation needed, factory tested |
| Top Seal | Hydraulic or Mechanical | Wells with gas/water channeling | Integrated packer device |
Data source: Technical data table.
Liner hangers are matched to the liner size and the parent casing size.
| Liner Size Range | Parent Casing Range | Connection Types |
|---|---|---|
| 3-1/2" to 10-3/4" | 5-1/2" to 13-3/8" | API BTC/LTC/STC, Premium Threads |
Specific dimensions and load ratings are confirmed against the selected liner and casing program at order.
A liner hanger is run at the top of the liner string and anchored inside the previous casing string.
Selecting the right liner hanger for your well:
Disclaimer: This equipment is designed for heavy-duty lifting and high-pressure cementing applications. Ensure strict compliance with local safety standards and verify load and pressure ratings prior to installation.
Need help calculating the liner weight or selecting the right slip configuration? Send us your liner size, weight, and parent casing specs, and our team will recommend the optimal hanger.
Q: What is the main function of a liner hanger?
A: It anchors the top of a liner string to the inside of the previous casing string, supporting the weight of the liner and allowing cementing operations to be performed.
Q: Can I rotate the liner during cementing?
A: Some mechanical hangers allow for rotation during cementing (using a rotating liner hanger), but standard mechanical hangers are set by rotation. Hydraulic hangers set without rotation, but can be equipped with special bearings for rotation during cementing.
Q: What is the purpose of a top packer?
A: A top packer (or liner top packer) is installed above the hanger to seal the annulus between the liner and the casing, preventing gas or water from migrating to the surface.
Q: What is the typical lead time?
A: Standard lead time is 6-8 weeks due to the complex assembly and testing of liner hangers. Contact us for project-specific scheduling.
For liner hanger series selection and support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.