HYRIG can supply the BM5-160 hydraulic motor. As part of the BM5 series, it is a large volume, disc valve, high-pressure motor designed with radial bearings to bear greater loads, offering excellent performance at low speeds.
The BM5-160 features a displacement of 160 ml/r. It delivers a continuous torque of 356 N·m at 17.5 MPa. The advanced disc distribution flow provides improved performance at low speed, and the valve automatically compensates for wear, ensuring high volumetric efficiency.
Data source: Technical data table
| Parameter | BM5-125 | BM5-160 | BM5-200 |
|---|---|---|---|
| Displacement (ml/r) | 125 | 160 | 200 |
| Flow (LPM) - Cont. | 75 | 75 | 75 |
| Speed (RPM) - Cont. | 552 | 430 | 345 |
| Speed (RPM) - Int. | 700 | 660 | 529 |
| Pressure (MPa) - Cont. | 17.5 | 17.5 | 17.7 |
| Pressure (MPa) - Int. | 28 | 25 | 25 |
| Torque (N·m) - Cont. | 278 | 356 | 445 |
| Torque (N·m) - Int. | 445 | 509 | 636 |
Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.
The BM5-160 is designed for heavy-duty drop-in replacement.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | Square flange (4-Φ13.5, pilot Φ100) or Rhombus |
| Shaft (Cylindrical) | Φ32x57 mm (Parallel key 10x8x45) |
| Oil Port Thread | Standard heavy-duty options |
| Weight (Approx.) | 13.0 kg |
For more options, refer to the BM5 Series Hydraulic Motors.
The BM5 series features an advanced disc distribution flow design. The valve can automatically compensate for wear, ensuring high volumetric efficiency over a long service life. The double taper roller bearings permit high radial loads, making this motor suitable for heavier vehicles in traction drive applications.
Looking for a compatible replacement for a 160 ml/r disc valve motor? The BM5-160 is a direct alternative. Before ordering, verify:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the 160 ml/r displacement is right for your system? Tell us your required torque and RPM, and our engineers will help you confirm the correct model.
Q: What is the maximum continuous torque of the BM5-160?
The BM5-160 delivers a maximum continuous torque of 356 N·m at a continuous pressure of 17.5 MPa.
Q: What type of bearings does this motor use?
The BM5-160 features double taper roller bearings specifically designed to permit high radial loads.
For BM5-160 hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.