HYRIG can supply the BM5 series hydraulic motors range. The BM5 is a large volume, disc valve, high pressure motor designed with radial bearings to bear greater loads, offering excellent performance at low speeds.
With displacements ranging from 80 ml/r to 500 ml/r, the BM5 series features an advanced disc distribution flow design. The valve can automatically compensate for wear, ensuring high volumetric efficiency. Double taper roller bearings permit high radial loads, making these motors suitable for heavier vehicles in traction drive applications.
Data source: Technical data table
| Displacement (ml/r) | Flow Cont. (LPM) | Speed Cont. (RPM) | Pressure Cont. (MPa) | Torque Cont. (N·m) |
|---|---|---|---|---|
| 80 | 75 | 850 | 17.5 | 178 |
| 100 | 75 | 675 | 17.5 | 223 |
| 125 | 75 | 552 | 17.5 | 278 |
| 160 | 75 | 430 | 17.5 | 356 |
| 200 | 75 | 345 | 17.7 | 445 |
| 250 | 75 | 276 | 17.5 | 557 |
| 280 | 75 | 246 | 17.5 | 592 |
| 305 | 75 | 226 | 17.5 | 580 |
| 400 | 75 | 180 | 15 | 715 |
| 500 | 75 | 144 | 12 | 720 |
Note: Continuous data refers to the max value of operating motor continuously. A simultaneous max RPM and max pressure is not recommended.
The BM5S is the bearingless variant of the BM5 series. It shares the same large volume, disc valve, and high-pressure characteristics but is designed to be integrated directly into a gearbox or custom housing, utilizing the customer's own bearings.
The BM5 series offers various flange and shaft combinations to match specific mounting requirements.
| Shaft Type | Description |
|---|---|
| Shaft A | Cylinder shaft: Φ32x57, parallel key: 10x8x45, link thread: M8 |
| Shaft B | Cylinder shaft: Φ31.75x36, parallel key: 7.96x7.96x32, link thread: M8 |
| Shaft C | Cylinder shaft: Φ31.75x46, parallel key: 7.96x7.96x32, link thread: 3/8-16UNC |
| Shaft D | Cone shaft: Φ31.75, woodruff key: Φ25.4x7.96, link thread: 1-20UNEF |
When replacing an existing heavy-duty motor with the BM5 series, verify:
The BM5 series is widely used in heavy-duty applications:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need a specific displacement or a bearingless configuration? Explore the individual models: BM5-160 Hydraulic Motor, BM5-250 Hydraulic Motor, or contact us for a custom design.
Q: What is the maximum continuous pressure of the BM5 series?
The BM5 series can handle a continuous pressure of up to 17.7 MPa (for the 200 ml/r model).
Q: What is the difference between BM5 and BM5S?
The BM5S is a bearingless motor. It does not include the output shaft bearings, allowing it to be directly integrated into your existing gearbox or wheel hub assembly.
For BM5 series hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.