HYRIG can supply the BM4-395 hydraulic motor. As part of the BM4 series, it is a heavy-duty, high-pressure motor designed with double taper roller bearings to handle high radial loads in demanding applications.
The BM4-395 features a displacement of 395 ml/r. It delivers substantial torque of 697 N·m at a continuous pressure of 14 MPa. The advanced disc distribution flow provides improved performance at low speeds, while the heavy-duty bearings support high radial loads.
Data source: Technical data table
| Parameter | BM4-310 | BM4-395 | BM4-490 |
|---|---|---|---|
| Displacement (ml/r) | 310 | 395 | 490 |
| Flow (LPM) - Cont. | 80 | 80 | 80 |
| Speed (RPM) - Cont. | 250 | 200 | 156 |
| Speed (RPM) - Int. | 300 | 240 | 200 |
| Pressure (MPa) - Cont. | 14 | 14 | 14 |
| Pressure (MPa) - Int. | 15 | 15 | 15 |
| Torque (N·m) - Cont. | 554 | 697 | 870 |
| Torque (N·m) - Int. | 663 | 798 | 1056 |
Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.
The BM4-395 is designed for heavy-duty drop-in replacement.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | Square flange (4-Φ13 bolts, pilot Φ100) or Rhombus |
| Shaft (Cylindrical) | Φ40x63 mm (Parallel key 12x8x50) |
| Oil Port Thread | Standard heavy-duty options |
| Weight (Approx.) | 16.5 kg |
For more options, refer to the BM4 Series Hydraulic Motors.
The BM4 series features a disc valve distribution system that automatically compensates for wear, ensuring high volumetric efficiency even at low speeds. The double taper roller bearings are a key feature, designed to support the heavy radial loads encountered in wheel drives and traction applications.
Looking for a compatible replacement for a 395 ml/r heavy-duty motor? The BM4-395 is a direct alternative. Before ordering, verify:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the 395 ml/r displacement or the bearing capacity is right for your system? Tell us your radial load and torque requirements, and our engineers will help you confirm the correct model.
Q: What is the maximum continuous torque of the BM4-395?
The BM4-395 delivers a maximum continuous torque of 697 N·m at a continuous pressure of 14 MPa.
Q: Can this motor be used in high radial load applications?
Yes, the BM4 series features double taper roller bearings specifically designed to permit high radial loads, making it suitable for traction drives and heavy machinery.
For BM4-395 hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.