HYRIG can supply the BM4 series hydraulic motors range. The BM4 is a large spool valve, high-pressure motor featuring a radial ball-bearing design and double taper roller bearings, allowing it to bear greater loads in demanding applications.
With displacements ranging from 195 ml/r to 800 ml/r, the BM4 series is built for high pressure and high torque. The robust double taper roller bearings permit high radial loads, making it ideal for heavy vehicles and traction drives. The series also includes the BM4W wheel motor, which is specifically optimized with radial bearings for direct wheel mounting.
Data source: Technical data table
| Displacement (ml/r) | Flow Cont. (LPM) | Speed Cont. (RPM) | Pressure Cont. (MPa) | Torque Cont. (N·m) |
|---|---|---|---|---|
| 195 | 75 | 390 | 14 | 400 |
| 245 | 80 | 320 | 14 | 435 |
| 310 | 80 | 250 | 14 | 554 |
| 395 | 80 | 200 | 14 | 697 |
| 490 | 80 | 156 | 14 | 870 |
| 625 | 80 | 120 | 12.5 | 998 |
| 800 | 80 | 100 | 10 | 1023 |
Note: Continuous data refers to the max value of operating motor continuously. A simultaneous max RPM and max pressure is not recommended.
The BM4W is a wheel motor variant featuring radial bearings designed to withstand significant radial forces. It shares the same main specifications and performance data as the standard BM4, making it an excellent choice for direct wheel drive applications in agricultural and construction machinery.
The BM4 series offers various flange and shaft combinations. Below are the standard shaft options.
| Shaft Type | Description |
|---|---|
| Shaft A | Cylinder shaft: Φ40x63, parallel key: 12x8x50, link thread: M12 |
| Shaft B | Cylinder shaft: Φ35x46, parallel key: 10x8x35, link thread: M10 |
| Shaft C | Cylinder shaft: Φ32x46, parallel key: 10x8x35, link thread: M10 |
| Shaft D | Rectangle spline shaft: Φ40x63, 6-40x32x8, link thread: M12 |
When replacing an existing heavy-duty motor with the BM4 series, verify:
The BM4 series is widely used in heavy-duty applications:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need a specific displacement or a wheel drive variant? Explore the individual models: BM4-245 Hydraulic Motor, BM4-395 Hydraulic Motor, or contact us for a custom configuration.
Q: What is the maximum continuous pressure of the BM4 series?
The BM4 series can handle a continuous pressure of up to 14 MPa for models from 195 to 490 ml/r.
Q: What is the difference between the standard BM4 and BM4W?
The BM4W is specifically designed as a wheel motor with enhanced radial bearing capacity to handle the side loads imposed by direct wheel mounting.
For BM4 series hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.