HYRIG can supply the BM3-200 hydraulic motor. It is a spool valve motor featuring a displacement of 200 ml/r, available with line ports or manifold mounting options to suit various hydraulic system designs.
The BM3-200 is designed for reliability and flexibility. With a max continuous pressure of 12.5 MPa and a max continuous speed of 258 RPM, it delivers a substantial torque of 361 N·m, making it suitable for medium-duty applications that require a compact footprint.
Data source: Technical data table
| Parameter | BM3-200 |
|---|---|
| Displacement (ml/r) | 200 |
| Flow (LPM) - Cont. | 55 |
| Speed (RPM) - Cont. | 258 |
| Pressure (MPa) - Cont. | 12.5 |
| Torque (N·m) - Cont. | 361 |
Note: Continuous data refers to the max value of operating motor continuously.
Available in standard line port (Figuration A) or manifold mount (Figuration B/C).
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | Square flange (4-Φ13 bolts, pilot Φ100) |
| Shaft (Cylindrical) | Φ30x36 mm (Parallel key 8x7x28) |
| Oil Port Thread (Fig A) | 2-M22x1.5 |
| Drain Port | M14x1.5 |
For more options, refer to the BM3 Series Hydraulic Motors.
This motor utilizes a spool valve design. In the manifold mount configuration, the motor is mounted directly against a hydraulic manifold. This eliminates the need for external piping, reducing pressure drops, minimizing leak points, and saving installation space.
Looking for a replacement? Ensure you check the porting configuration first. If your existing setup uses a manifold block, the Figuration B/C is the direct match. If it uses standard hoses, choose Figuration A.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need the manifold version? Contact us with your system requirements to ensure the correct port face alignment.
Q: What is the maximum torque of the BM3-200?
The BM3-200 delivers a continuous torque of 361 N·m at 12.5 MPa.
Q: Can I use this motor in a series circuit?
Yes, the BM3 series is designed to be used in parallel or series circuits. However, ensure a drain line is connected if back pressure exceeds 5 MPa.
For BM3-200 hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.