BM3 Series Hydraulic Motors | Line Port & Manifold Mount

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the BM3 series hydraulic motors range. The BM3 is a spool valve type motor that offers flexible installation options, including standard line ports and manifold mount configurations, making it suitable for compact hydraulic systems.
Conatct For Details
DetailReview(0)Additional

BM3 Series Hydraulic Motors

HYRIG can supply the BM3 series hydraulic motors range. The BM3 is a spool valve type motor that offers flexible installation options, including standard line ports and manifold mount configurations, making it suitable for compact hydraulic systems.

With displacements ranging from 100 ml/r to 400 ml/r, the BM3 series provides reliable performance with a maximum continuous pressure of up to 15 MPa. The ability to choose between line port connections and manifold mounting allows for streamlined system design and reduced potential leak points.

Key Facts

  • Type: Spool valve motor
  • Displacement Range: 100 ml/r to 400 ml/r
  • Max Continuous Pressure: Up to 15 MPa
  • Max Continuous Torque: Up to 445 N·m
  • Mounting Options: Line port (Figuration A) or Manifold Mount (Figuration B/C)
  • Design: Flexible, easy installation

BM3 Series Specifications

Data source: Technical data table

Displacement (ml/r)Flow Cont. (LPM)Speed Cont. (RPM)Pressure Cont. (MPa)Torque Cont. (N·m)
1005551712.5176
1605532312.5260
2005525812.5361
2505520612.5400
3155516412.5440
4005512911445

Note: Continuous data refers to the max value of operating motor continuously. A simultaneous max RPM and max pressure is not recommended.

Dimensions & Installation Variants

The BM3 series is distinguished by its porting and mounting flexibility.

  • Figuration A (Line Port): Standard threaded ports for hose connections.
  • Figuration B/C (Manifold Mount): Designed to be bolted directly against a manifold block, eliminating external hoses and fittings for a more compact and leak-free system.
Shaft TypeDescription
Shaft ACylinder shaft: Φ30x36, parallel key: 8x7x28, link thread: M8
Shaft BCylinder shaft: Φ25x36, parallel key: 8x7x28, link thread: M8
Shaft CRectangle spline shaft: Φ25x32, 6-25x22x6, link thread: M8

Cross-Reference & Replacement

When replacing an existing motor with the BM3 series, pay close attention to:

  1. Mounting Interface: Determine if your system requires standard line ports or a manifold mount face.
  2. Shaft Dimensions: Match the shaft diameter and keyway or spline to your existing coupling.
  3. Port Configuration: Check the bolt pattern and port locations on the manifold if applicable.

Applications

  • Agricultural Machinery: Tractor attachments and harvesters.
  • Material Handling: Small winches and rotary drives.
  • Industrial Equipment: Conveyor systems and machine tools where space is limited.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need a specific displacement or manifold configuration? Explore the individual models: BM3-100 Hydraulic Motor, BM3-200 Hydraulic Motor, or contact us for a custom design.

Frequently Asked Questions

Q: What is a manifold mount hydraulic motor?
A manifold mount motor does not have standard threaded ports. Instead, it has flat port faces with O-ring seals, allowing it to be bolted directly to a valve block or manifold, reducing hose clutter and leak points.

Q: What is the maximum pressure of the BM3 series?
The BM3 series can handle up to 15 MPa of continuous pressure for most models, and 11 MPa for the 400 ml/r model.

Contact

For BM3 series hydraulic motor selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit