BM2-315 Hydraulic Motor | 315 ml/r Gerotor Motor

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the BM2-315 hydraulic motor. As part of the BM2 series, it is a medium-duty, spool valve type motor featuring a gerotor design that provides higher efficiency and can bear higher pressure than the BM1 series.
Conatct For Details
DetailReview(0)Additional

BM2-315 Hydraulic Motor | 315 ml/r Gerotor Motor

HYRIG can supply the BM2-315 hydraulic motor. As part of the BM2 series, it is a medium-duty, spool valve type motor featuring a gerotor design that provides higher efficiency and can bear higher pressure than the BM1 series.

The BM2-315 features a displacement of 315 ml/r. It is designed to provide the best combination of efficiency and economy in medium load applications. The credible shaft seal design allows for use in parallel or series circuits.

Key Facts

  • Displacement: 315 ml/r
  • Max Continuous Pressure: 8.5 MPa
  • Max Continuous Torque: 360 N·m
  • Max Continuous Speed: 190 RPM
  • Flow Rate: 60 LPM
  • Design: Gerotor, spool valve
  • Mounting: Various flange and shaft options available

BM2-315 Specifications

Data source: Technical data table

ParameterBM2-250BM2-315BM2-400
Displacement (ml/r)250315400
Flow (LPM) - Cont.606060
Speed (RPM) - Cont.240190160
Speed (RPM) - Int.300240200
Pressure (MPa) - Cont.118.58
Pressure (MPa) - Int.1411.511.5
Torque (N·m) - Cont.352360420
Torque (N·m) - Int.470470548

Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.

Dimensions

The BM2-315 is designed for drop-in replacement. Below are standard dimensions for the H-type (standard) configuration.

Dimension ItemStandard Value (mm)
Mounting FlangeRhombus flange (2-Φ13.5, pilot Φ82.5)
Shaft (Cylindrical)Φ25 mm (Parallel key 8x7x32)
Oil Port ThreadG1/2 or M22x1.5
Drain PortM14x1.5
Weight (Approx.)9.5 kg

For more options, refer to the BM2 Series Hydraulic Motors.

Structure / Working Principle

The motor utilizes a gerotor design combined with a spool valve distribution system. This structure ensures higher volumetric efficiency compared to older BM1 models. When pressurized hydraulic oil enters the inlet port, it drives the internal gear set to rotate, generating torque. The spool valve smoothly directs the oil flow, allowing for precise control of the shaft rotation direction and speed.

Cross-Reference & Replacement

Looking for a compatible replacement for a 315 ml/r gerotor motor? The BM2-315 is a direct alternative. Before ordering, verify:

  1. Flange Bolt Pattern: Check the 2-bolt or 4-bolt spacing.
  2. Shaft Dimension: Confirm the shaft diameter and keyway length.
  3. Port Size: Ensure the thread matches your hose fittings (G1/2 is standard).

Applications

  • Agricultural Equipment: Small augers, spreaders, and conveyor drives.
  • Construction Machinery: Mini excavators and trenchers.
  • Industrial Equipment: Mixers and rotary tables.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the 315 ml/r displacement is right for your system? Tell us your required torque and RPM, and our engineers will help you confirm the correct model.

Frequently Asked Questions

Q: What is the maximum continuous torque of the BM2-315?
The BM2-315 delivers a maximum continuous torque of 360 N·m at a continuous pressure of 8.5 MPa.

Q: Can I use this motor in a series circuit?
Yes, the BM2-315 is equipped with a high-pressure shaft seal that allows it to be used in parallel or series circuits. However, a drain line is required if back pressure exceeds 5 MPa.

Q: What is the typical lead time for a BM2-315 order?
Standard configurations usually ship within 15-20 days. For urgent downtime situations, please contact us directly to check current stock availability.

Contact

For BM2-315 hydraulic motor selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit