HYRIG can supply the BM2-200 hydraulic motor. As part of the BM2 series, it is a medium-duty, spool valve type motor featuring a gerotor design that provides higher efficiency and can bear higher pressure than the BM1 series.
The BM2-200 features a displacement of 200 ml/r. It is designed to provide the best combination of efficiency and economy in medium load applications. The credible shaft seal design allows for use in parallel or series circuits.
Data source: Technical data table
| Parameter | BM2-160 | BM2-200 | BM2-250 |
|---|---|---|---|
| Displacement (ml/r) | 160 | 200 | 250 |
| Flow (LPM) - Cont. | 60 | 60 | 60 |
| Speed (RPM) - Cont. | 375 | 300 | 240 |
| Speed (RPM) - Int. | 470 | 375 | 300 |
| Pressure (MPa) - Cont. | 16.5 | 13 | 11 |
| Pressure (MPa) - Int. | 20 | 17.5 | 14 |
| Torque (N·m) - Cont. | 363 | 358 | 352 |
| Torque (N·m) - Int. | 430 | 448 | 470 |
Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.
The BM2-200 is designed for drop-in replacement. Below are standard dimensions for the H-type (standard) configuration.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | Rhombus flange (2-Φ13.5, pilot Φ82.5) |
| Shaft (Cylindrical) | Φ25 mm (Parallel key 8x7x32) |
| Oil Port Thread | G1/2 or M22x1.5 |
| Drain Port | M14x1.5 |
| Weight (Approx.) | 8.5 kg |
For more options, refer to the BM2 Series Hydraulic Motors.
The motor utilizes a gerotor design combined with a spool valve distribution system. This structure ensures higher volumetric efficiency compared to older BM1 models. When pressurized hydraulic oil enters the inlet port, it drives the internal gear set to rotate, generating torque. The spool valve smoothly directs the oil flow, allowing for precise control of the shaft rotation direction and speed.
Looking for a compatible replacement for a 200 ml/r gerotor motor? The BM2-200 is a direct alternative. Before ordering, verify:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the 200 ml/r displacement is right for your system? Tell us your required torque and RPM, and our engineers will help you confirm the correct model.
Q: What is the maximum continuous torque of the BM2-200?
The BM2-200 delivers a maximum continuous torque of 358 N·m at a continuous pressure of 13 MPa.
Q: Can I use this motor in a series circuit?
Yes, the BM2-200 is equipped with a high-pressure shaft seal that allows it to be used in parallel or series circuits. However, a drain line is required if back pressure exceeds 5 MPa.
Q: What is the typical lead time for a BM2-200 order?
Standard configurations usually ship within 15-20 days. For urgent downtime situations, please contact us directly to check current stock availability.
For BM2-200 hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.