BM4-245 Hydraulic Motor | 245 ml/r Heavy Duty Motor

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the BM4-245 hydraulic motor. As part of the BM4 series, it is a heavy-duty, high-pressure motor designed with double taper roller bearings to handle high radial loads in demanding applications.
Conatct For Details
DetailReview(0)Additional

BM4-245 Hydraulic Motor | 245 ml/r Heavy Duty Motor

HYRIG can supply the BM4-245 hydraulic motor. As part of the BM4 series, it is a heavy-duty, high-pressure motor designed with double taper roller bearings to handle high radial loads in demanding applications.

The BM4-245 features a displacement of 245 ml/r. It delivers high torque of 435 N·m at a continuous pressure of 14 MPa. The double taper roller bearings permit high radial loads, making this motor an excellent choice for heavy vehicles and traction drives.

Key Facts

  • Displacement: 245 ml/r
  • Max Continuous Pressure: 14 MPa
  • Max Continuous Torque: 435 N·m
  • Max Continuous Speed: 320 RPM
  • Flow Rate: 80 LPM
  • Design: Disc valve, high load bearings
  • Mounting: Various flange and shaft options available

BM4-245 Specifications

Data source: Technical data table

ParameterBM4-245BM4-310
Displacement (ml/r)245310
Flow (LPM) - Cont.8080
Speed (RPM) - Cont.320250
Speed (RPM) - Int.390300
Pressure (MPa) - Cont.1414
Pressure (MPa) - Int.17.515
Torque (N·m) - Cont.435554
Torque (N·m) - Int.502663

Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.

Dimensions

The BM4-245 is designed for heavy-duty drop-in replacement.

Dimension ItemStandard Value (mm)
Mounting FlangeSquare flange (4-Φ13 bolts, pilot Φ100) or Rhombus
Shaft (Cylindrical)Φ40x63 mm (Parallel key 12x8x50)
Oil Port ThreadStandard heavy-duty options
Weight (Approx.)15.0 kg

For more options, refer to the BM4 Series Hydraulic Motors.

Structure / Working Principle

The BM4 series features a disc valve distribution system that automatically compensates for wear, ensuring high volumetric efficiency even at low speeds. The double taper roller bearings are a key feature, designed to support the heavy radial loads encountered in wheel drives and traction applications.

Cross-Reference & Replacement

Looking for a compatible replacement for a 245 ml/r heavy-duty motor? The BM4-245 is a direct alternative. Before ordering, verify:

  1. Radial Load Capacity: Ensure the BM4's bearing capacity meets your machinery's requirements.
  2. Shaft Dimension: Confirm the shaft diameter and keyway length.
  3. Flange Mounting: Check the 4-bolt pattern and pilot diameter.

Applications

  • Construction Machinery: Wheel loaders, heavy excavators.
  • Agricultural Equipment: Large tractors, harvesters.
  • Material Handling: Heavy winches and lifting equipment.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the 245 ml/r displacement or the bearing capacity is right for your system? Tell us your radial load and torque requirements, and our engineers will help you confirm the correct model.

Frequently Asked Questions

Q: What is the maximum continuous torque of the BM4-245?
The BM4-245 delivers a maximum continuous torque of 435 N·m at a continuous pressure of 14 MPa.

Q: Are the bearings in the BM4-245 designed for side loads?
Yes, it utilizes double taper roller bearings that permit high radial loads, making it suitable for applications with significant side forces.

Contact

For BM4-245 hydraulic motor selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit