HYRIG can supply the BMT-400 hydraulic motor. As part of the BMT series, it is a large volume, disc valve, high-pressure motor designed to provide high torque for demanding traction drive applications.
The BMT-400 features a displacement of 400 ml/r. It delivers a continuous torque of 1095 N·m at 18 MPa. The advanced disc distribution flow ensures high volumetric efficiency at low speeds, and the double taper roller bearings permit high radial loads.
Data source: Technical data table
| Parameter | BMT-315 | BMT-400 | BMT-500 |
|---|---|---|---|
| Displacement (ml/r) | 315 | 400 | 500 |
| Flow (LPM) - Cont. | 125 | 125 | 125 |
| Speed (RPM) - Cont. | 380 | 302 | 237 |
| Speed (RPM) - Int. | 458 | 364 | 284 |
| Pressure (MPa) - Cont. | 20 | 18 | 16 |
| Pressure (MPa) - Int. | 24 | 21 | 18 |
| Torque (N·m) - Cont. | 962 | 1095 | 1245 |
| Torque (N·m) - Int. | 1154 | 1269 | 1409 |
Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.
The BMT-400 is designed for heavy-duty drop-in replacement.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | Square flange (4-Φ13, pilot Φ125) |
| Shaft (Cylindrical) | Φ40x79 mm (Parallel key 12x8x70) |
| Oil Port Thread | Standard heavy-duty options |
| Weight (Approx.) | 20.0 kg |
For more options, refer to the BMT Series Hydraulic Motors.
The BMT series features an advanced disc distribution flow design. The valve automatically compensates for wear, ensuring high volumetric efficiency over a long service life. The double taper roller bearings permit high radial loads, making this motor suitable for heavier vehicles in traction drive applications.
Looking for a compatible replacement for a 400 ml/r heavy-duty motor? The BMT-400 is a direct alternative. Before ordering, verify:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the 400 ml/r displacement is right for your system? Tell us your required torque and RPM, and our engineers will help you confirm the correct model.
Q: What is the maximum continuous torque of the BMT-400?
The BMT-400 delivers a maximum continuous torque of 1095 N·m at a continuous pressure of 18 MPa.
Q: What type of bearings does this motor use?
The BMT-400 features double taper roller bearings specifically designed to permit high radial loads.
For BMT-400 hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.