BMT Series Hydraulic Motors | Heavy Duty Disc Valve

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the BMT series hydraulic motors range. The BMT is a large volume, disc valve, high-pressure motor with radial ball-bearing design, built to bear greater loads in rugged traction drive applications.
Conatct For Details
DetailReview(0)Additional

BMT Series Hydraulic Motors

HYRIG can supply the BMT series hydraulic motors range. The BMT is a large volume, disc valve, high-pressure motor with radial ball-bearing design, built to bear greater loads in rugged traction drive applications.

With displacements ranging from 250 ml/r to 800 ml/r, the BMT series delivers high torque (up to 1464 N·m) and features an advanced disc distribution flow design for improved low-speed performance. The valve automatically compensates for wear, ensuring high volumetric efficiency. The series includes the BMTS bearingless motor for custom gearbox integration.

Key Facts

  • Type: Large volume, disc valve motor
  • Displacement Range: 250 ml/r to 800 ml/r
  • Max Continuous Pressure: Up to 20 MPa
  • Max Continuous Torque: Up to 1464 N·m
  • Design: Disc valve, double taper roller bearings
  • Variants: Standard BMT & BMTS Bearingless Motor

BMT Series Specifications

Data source: Technical data table

Displacement (ml/r)Flow Cont. (LPM)Speed Cont. (RPM)Pressure Cont. (MPa)Torque Cont. (N·m)
25012549520727
31512538020962
400125302181095
500125237161245
630125196141318
80012515412.51464

Note: Continuous data refers to the max value of operating motor continuously. A simultaneous max RPM and max pressure is not recommended.

BMTS Bearingless Motor Variant

The BMTS is the bearingless version of the BMT series. It shares the same main specifications and performance data but is designed without the output shaft bearings, allowing it to be directly integrated into custom wheel hubs or gearboxes.

Dimensions

The BMT series offers various flange and shaft combinations to match specific mounting requirements.

Shaft TypeDescription
Shaft ACylinder shaft: Φ40x79, parallel key: 12x8x70, link thread: M12
Shaft BInvolute spline shaft: Φ38.1x79, 17teeth, DP12/24, link thread: 3/8-16UNC
Shaft CCylinder shaft: Φ40x79, parallel key: 12x8x70, link thread: M12

Cross-Reference & Replacement

When replacing an existing heavy-duty motor with the BMT series, verify:

  1. Torque Requirements: The BMT provides high torque for traction drives.
  2. Flange Type: Check the pilot diameter and bolt circle pattern.
  3. Shaft Configuration: Ensure the keyway or spline matches your coupling.

Applications

The BMT series is widely used in heavy-duty applications:

  • Construction Machinery: Heavy excavators, wheel loaders.
  • Agricultural Equipment: Large harvesters, tractors.
  • Material Handling: Heavy winches, cranes.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Need a specific displacement or a bearingless configuration? Explore the individual models: BMT-400 Hydraulic Motor, BMT-630 Hydraulic Motor, or contact us for a custom design.

Frequently Asked Questions

Q: What is the maximum continuous pressure of the BMT series?
The BMT series can handle a continuous pressure of up to 20 MPa for the 250 and 315 ml/r models.

Q: What is the difference between BMT and BMTS?
The BMTS is a bearingless motor. It does not include the output shaft bearings, allowing it to be directly integrated into your existing gearbox or wheel hub assembly.

Contact

For BMT series hydraulic motor selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit