BM6-625 Hydraulic Motor | 625 ml/r High Torque Motor

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the BM6-625 hydraulic motor. As part of the BM6 series, it is a large volume, disc valve, high-pressure motor designed to provide higher torque than the BM5 series for the most demanding applications.
Conatct For Details
DetailReview(0)Additional

BM6-625 Hydraulic Motor | 625 ml/r High Torque Motor

HYRIG can supply the BM6-625 hydraulic motor. As part of the BM6 series, it is a large volume, disc valve, high-pressure motor designed to provide higher torque than the BM5 series for the most demanding applications.

The BM6-625 features a displacement of 625 ml/r. It delivers a massive continuous torque of 1330 N·m at 17 MPa. The advanced disc distribution flow and double taper roller bearings permit high radial loads, making it an excellent choice for heavy vehicles in traction drive applications.

Key Facts

  • Displacement: 625 ml/r
  • Max Continuous Pressure: 17 MPa
  • Max Continuous Torque: 1330 N·m
  • Max Continuous Speed: 241 RPM
  • Flow Rate: 150 LPM
  • Design: Disc valve, double taper roller bearings
  • Mounting: Various flange and shaft options available

BM6-625 Specifications

Data source: Technical data table

ParameterBM6-490BM6-625BM6-800
Displacement (ml/r)490625800
Flow (LPM) - Cont.150150150
Speed (RPM) - Cont.307241184
Speed (RPM) - Int.454355276
Pressure (MPa) - Cont.20.51714
Pressure (MPa) - Int.27.51714
Torque (N·m) - Cont.121513301380
Torque (N·m) - Int.188513801650

Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.

Dimensions

The BM6-625 is designed for heavy-duty drop-in replacement.

Dimension ItemStandard Value (mm)
Mounting FlangeSquare flange (4-Φ14, pilot Φ127)
Shaft (Cylindrical)Φ40x79 mm (Parallel key 12x8x70)
Oil Port ThreadStandard heavy-duty options
Weight (Approx.)25.0 kg

For more options, refer to the BM6 Series Hydraulic Motors.

Structure / Working Principle

The BM6 series features an advanced disc distribution flow design. The valve automatically compensates for wear, ensuring high volumetric efficiency over a long service life. The double taper roller bearings permit high radial loads, making this motor suitable for heavier vehicles in traction drive applications.

Cross-Reference & Replacement

Looking for a compatible replacement for a 625 ml/r high torque motor? The BM6-625 is a direct alternative. Before ordering, verify:

  1. Flange Type: Check the pilot diameter and bolt circle pattern.
  2. Shaft Dimension: Confirm the shaft diameter and keyway length.
  3. Port Configuration: Ensure the port threads match your system.

Applications

  • Construction Machinery: Heavy excavators, wheel loaders.
  • Agricultural Equipment: Large harvesters, tractors.
  • Material Handling: Heavy winches, cranes.

Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.

Selection Support

Not sure if the 625 ml/r displacement is right for your system? Tell us your required torque and RPM, and our engineers will help you confirm the correct model.

Frequently Asked Questions

Q: What is the maximum continuous torque of the BM6-625?
The BM6-625 delivers a maximum continuous torque of 1330 N·m at a continuous pressure of 17 MPa.

Q: What type of bearings does this motor use?
The BM6-625 features double taper roller bearings specifically designed to permit high radial loads.

Contact

For BM6-625 hydraulic motor selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit