HYRIG can supply the BM6-310 hydraulic motor. As part of the BM6 series, it is a large volume, disc valve, high-pressure motor designed to provide higher torque than the BM5 series for the most demanding applications.
The BM6-310 features a displacement of 310 ml/r. It delivers a continuous torque of 930 N·m at 20.5 MPa. The advanced disc distribution flow and double taper roller bearings permit high radial loads, making it an excellent choice for heavy vehicles in traction drive applications.
Data source: Technical data table
| Parameter | BM6-245 | BM6-310 | BM6-395 |
|---|---|---|---|
| Displacement (ml/r) | 245 | 310 | 395 |
| Flow (LPM) - Cont. | 150 | 150 | 150 |
| Speed (RPM) - Cont. | 615 | 485 | 383 |
| Speed (RPM) - Int. | 834 | 698 | 563 |
| Pressure (MPa) - Cont. | 20.5 | 20.5 | 20.5 |
| Pressure (MPa) - Int. | 31 | 31 | 31 |
| Torque (N·m) - Cont. | 735 | 930 | 1169 |
| Torque (N·m) - Int. | 1180 | 1335 | 1655 |
Note: Continuous data refers to the max value of operating motor continuously. Intermittent data refers to the max value operating in 6 seconds per minute.
The BM6-310 is designed for heavy-duty drop-in replacement.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | Square flange (4-Φ14, pilot Φ127) |
| Shaft (Cylindrical) | Φ40x79 mm (Parallel key 12x8x70) |
| Oil Port Thread | Standard heavy-duty options |
| Weight (Approx.) | 22.0 kg |
For more options, refer to the BM6 Series Hydraulic Motors.
The BM6 series features an advanced disc distribution flow design. The valve automatically compensates for wear, ensuring high volumetric efficiency over a long service life. The double taper roller bearings permit high radial loads, making this motor suitable for heavier vehicles in traction drive applications.
Looking for a compatible replacement for a 310 ml/r high torque motor? The BM6-310 is a direct alternative. Before ordering, verify:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if the 310 ml/r displacement is right for your system? Tell us your required torque and RPM, and our engineers will help you confirm the correct model.
Q: What is the maximum continuous torque of the BM6-310?
The BM6-310 delivers a maximum continuous torque of 930 N·m at a continuous pressure of 20.5 MPa.
Q: What type of bearings does this motor use?
The BM6-310 features double taper roller bearings specifically designed to permit high radial loads.
For BM6-310 hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.