HYRIG can supply the BM6 series hydraulic motors range. The BM6 is a large volume, disc valve, high-pressure motor with radial ball-bearing design, providing higher torque than the BM5 series for the most demanding traction drive applications.
With displacements ranging from 195 ml/r to 985 ml/r, the BM6 series is built to deliver exceptional torque (up to 1570 N·m). The advanced disc distribution flow ensures high volumetric efficiency at low speeds, and the double taper roller bearings permit high radial loads. The series includes the BM6S bearingless motor and the BM6B brake motor.
Data source: Technical data table
| Displacement (ml/r) | Flow Cont. (LPM) | Speed Cont. (RPM) | Pressure Cont. (MPa) | Torque Cont. (N·m) |
|---|---|---|---|---|
| 195 | 150 | 775 | 20.5 | 575 |
| 245 | 150 | 615 | 20.5 | 735 |
| 310 | 150 | 485 | 20.5 | 930 |
| 395 | 150 | 383 | 20.5 | 1169 |
| 490 | 150 | 307 | 20.5 | 1215 |
| 625 | 150 | 241 | 17 | 1330 |
| 800 | 150 | 184 | 14 | 1380 |
| 985 | 150 | 153 | 12 | 1570 |
Note: Continuous data refers to the max value of operating motor continuously. A simultaneous max RPM and max pressure is not recommended.
The BM6 series offers various flange and shaft combinations. Standard shafts include cylindrical and involute spline options.
| Shaft Type | Description |
|---|---|
| Shaft A | Cylinder shaft: Φ38.1x79, parallel key: 9.525x9.525x57, link thread: 3/8-16UNC |
| Shaft B | Involute spline shaft: Φ38.1x79, 17teeth, DP12/24, link thread: 3/8-16UNC |
| Shaft C | Cylinder shaft: Φ40x79, parallel key: 12x8x70, link thread: M12 |
When replacing an existing high-torque motor with the BM6 series, verify:
The BM6 series is widely used in heavy-duty applications:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need a specific displacement or a brake configuration? Explore the individual models: BM6-310 Hydraulic Motor, BM6-625 Hydraulic Motor, or contact us for a custom design.
Q: What is the maximum continuous torque of the BM6 series?
The BM6 series can deliver a maximum continuous torque of up to 1570 N·m (for the 985 ml/r model).
Q: What is the difference between BM5 and BM6?
The BM6 series has a larger volume and can handle higher continuous pressure (up to 20.5 MPa), resulting in higher torque output compared to the BM5 series.
For BM6 series hydraulic motor selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.