HYRIG can supply the BZZ 010-250 hydraulic steering unit. This 250 ml/r Power Steering Unit (PSU) is designed as a compatible replacement for standard Eaton Char-Lynn 250 ml/r configurations, offering optimized control valve performance for tractors and heavy vehicles.
The BZZ 010-250 features a length of 163 mm and a maximum system pressure of 16 MPa. It is available in Open Center, Closed Center, and Load Sensing configurations to match your original hydraulic system. The standard 12-tooth involute spline ensures compatibility with most existing steering columns.
Data source: Technical data table
| Parameter | 010-200 | 010-250 | 010-315 |
|---|---|---|---|
| Displacement (ml/r) | 200 | 250 | 315 |
| Length L (mm) | 157 | 163 | 173 |
| Max System Pressure (MPa) | 16 | 16 | 16 |
| Input Torque (N·m) | 2.8 - 4.0 | 2.8 - 4.0 | 2.8 - 4.0 |
| Max Back Pressure (MPa) | 2.1 | 2.1 | 2.1 |
The 010-250 is available in multiple configurations to match your original Char-Lynn port and shaft setup.
| Feature | Options | Order Code Example |
|---|---|---|
| Open Center | Short Neck / M20x1.5 | 010-1106 |
| Open Center | Long Neck / G1/2 | 010-1216 |
| Load Sensing | Internal Spline / M22x1.5 | 010-5346 |
For complete coding details, refer to the 010 Series Hydraulic Steering Units.
Looking to replace a 250 ml/r Char-Lynn steering unit? Here's what to check to ensure a drop-in fit:
Disclaimer: Eaton and Char-Lynn are registered trademarks of Eaton Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by Eaton Corporation.
Need a specific port thread or shaft connection for your 250 ml/r system? Tell us the original part number or machine model, and our engineers will confirm the exact BZZ code.
Q: Is this an original Eaton Char-Lynn steering unit?
No. HYRIG supplies independent, compatible replacement products. We are not affiliated with Eaton Corporation.
Q: What is the length of the 010-250 PSU?
The 010-250 has a body length (L) of 163 mm.
Q: How do I know if this will fit my machine?
Verify the displacement (250 ml/r), the port thread size, and the steering column spline. If these match your original unit, the BZZ 010-250 is a drop-in replacement. You can also contact us with your machine model for confirmation.
For BZZ 010-250 steering unit selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.