HYRIG can supply the 020 and 025 series hydraulic steering units. These low input torque Power Steering Units (PSU) are optimized designs based on the 010 series, making them ideal for forklifts and marine rudder control systems. They are available as compatible replacements for standard configurations.
The 020 series offers a low input torque of 1.8-2.5 N·m, while the 025 series is an ultra-low torque version with 1.1-1.8 N·m. Both series provide smoother steering and reduced driver fatigue, featuring a basic open center system.
Data source: Technical data table
| Parameter | 020 Series (Low Torque) | 025 Series (Ultra-Low Torque) |
|---|---|---|
| Displacement Range | 80 - 500 ml/r | 80 - 500 ml/r |
| Input Torque | 1.8 - 2.5 N·m | 1.1 - 1.8 N·m |
| Max System Pressure | 16 MPa | 16 MPa |
| System Type | Open Center | Open Center |
| Max Temp | 93 °C | 93 °C |
The 020 and 025 series share the same mounting dimensions as the standard 010 series.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | 4-M10x1.5 (Depth 16) |
| Flange Bolt Pattern | 84 x 84 mm |
| Shaft Type | Short neck, Long neck, or Internal involute spline |
| Spline Data | 12 Teeth, 30° Pressure Angle, Pitch Dia. Φ19.05 mm |
Replacing a forklift or marine steering unit? Here's what to check:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Not sure if you need the 020 or 025 series? Tell us your current steering wheel effort and machine model, and our engineers will recommend the best option.
Q: What is the main difference between the 020 and 025 series?
The 025 series is an ultra-low torque version, requiring even less steering effort (1.1-1.8 N·m) compared to the 020 series (1.8-2.5 N·m).
Q: Can I replace my old steering unit with this without changing the hoses?
If the port threads match (M20x1.5 or G1/2) and the displacement matches, it is generally a drop-in replacement.
For 020 or 025 series low torque steering unit selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.