HYRIG can supply the 030 series hydraulic steering units. The 030 is a large displacement Power Steering Unit (PSU) with 630, 800, and 1000 ml/r options, designed for heavier engineering vehicles and demanding applications. It is available as a compatible replacement for standard configurations.
The 030 series features an optimized control valve design and special casting for low pressure drop. It is available in two basic systems: Open Center and Load Sensing, providing reliable steering force for large machinery.
Data source: Technical data table
| Parameter | 030-630 | 030-800 | 030-1000 |
|---|---|---|---|
| Displacement (ml/r) | 630 | 800 | 1000 |
| Length L (mm) | 215 | 235 | 259 |
| Max System Pressure (MPa) | 16 | 16 | 16 |
| Input Torque (N·m) | 2.8 - 4.0 | 2.8 - 4.0 | 2.8 - 4.0 |
The 030 series features a heavy-duty flange and shaft design.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Flange | 4-M10x1.5 (Depth 16) |
| Flange Bolt Pattern | 84 x 84 mm |
| Shaft Type | Short neck, Long neck, or Internal involute spline |
| Spline Data | 12 Teeth, 30° Pressure Angle, Pitch Dia. Φ19.05 mm |
Replacing a large displacement steering unit on a heavy machine? Here's what to check:
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Need to confirm if the 030 series can handle your specific heavy vehicle? Tell us your steering cylinder volume and required turns lock-to-lock, and our engineers will verify the model.
Q: What is the maximum displacement of the 030 series?
The 030 series offers displacements of 630, 800, and 1000 ml/r.
Q: Can I use this in a load sensing system?
Yes, the 030 series is available in both Open Center and Load Sensing configurations.
For 030 series large displacement steering unit selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.