060 Series Integral PSU | Steering Unit with Valves

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the 060 series hydraulic steering units. The 060 is an integral Power Steering Unit (PSU) that incorporates all combination valve functions (inlet check valve, safety valve, manual check valve, shock valve, and anti-cavitation valve), resulting in a compact and convenient design.
Conatct For Details
DetailReview(0)Additional

060 Series Integral PSU | Steering Unit with Valves

HYRIG can supply the 060 series hydraulic steering units. The 060 is an integral Power Steering Unit (PSU) that incorporates all combination valve functions (inlet check valve, safety valve, manual check valve, shock valve, and anti-cavitation valve), resulting in a compact and convenient design.

By integrating these valves directly into the steering unit, the 060 series eliminates the need for external valve blocks, saving installation space and reducing potential leak points. It is available in Open Center, Closed Center, and Load Sensing configurations.

Key Facts

  • Type: Integral PSU (with built-in valves)
  • Displacement Range: 50 ml/r to 500 ml/r
  • Max System Pressure: 16 MPa
  • Input Torque: 1.7 - 2.5 N·m
  • System Types: Open Center, Closed Center, Load Sensing
  • Replacement Compatibility: Eaton Char-Lynn 10 Series configurations

060 Series Specifications

Data source: Technical data table

Displacement (ml/r)Length L (mm)Max System Pressure (MPa)Input Torque (N·m)
50130.5161.7 - 2.5
63132.5161.7 - 2.5
80133.5161.7 - 2.5
100135161.7 - 2.5
125143161.7 - 2.5
160148161.7 - 2.5
200154161.7 - 2.5
250161161.7 - 2.5
315166161.7 - 2.5
400174161.7 - 2.5
500184161.7 - 2.5

Dimensions

The 060 series uses a 4-bolt square flange for easy mounting.

Dimension ItemStandard Value (mm)
Mounting Flange4-20x1.5 (Depth 15)
Flange Bolt Pattern82 x 82 mm
Shaft Type12-tooth involute spline (Effective depth 15 mm)

Cross-Reference & Replacement

Replacing an older unit that uses a separate valve block? The 060 series can simplify your system by integrating the valves. Here's what to check:

  1. System Type: Verify if you need Open Center, Closed Center, or Load Sensing.
  2. Port Threads: Check your hose connections (M20x1.5, M22x1.5, or G1/2).
  3. Space Constraints: The integrated valve design may save space, but verify the overall length (L) fits your machine.

Disclaimer: Eaton and Char-Lynn are registered trademarks of Eaton Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by Eaton Corporation.

Applications

  • Material Handling: Heavy forklifts and cranes where system compactness is essential.
  • Construction: Wheel loaders and excavators requiring integrated system protection.

Selection Support

Need to replace a 060 series unit or upgrade from an external valve block system? Tell us your machine model and we will confirm the exact code.

Frequently Asked Questions

Q: What valves are integrated into the 060 series?
It includes an inlet safety valve, cylinder port shock valve, anti-cavitation valve, inlet check valve, and internal check valve.

Q: Is this an original Eaton Char-Lynn product?
No. HYRIG supplies independent, compatible replacement products. We are not affiliated with Eaton Corporation.

Contact

For 060 series integral steering unit selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit