HYRIG can supply the FK and FKS combination valve blocks. These blocks bolt directly onto the port face of the steering unit to provide essential safety protection for your hydraulic steering system.
The FK/FKS valve block integrates multiple protective functions into one compact unit. It is the ideal companion for standard steering units that do not have built-in valves, ensuring the longevity and safety of your steering circuit.
Data source: Technical data table
| Model | Safety Valve Pressure (MPa) | Overload Valve Pressure (MPa) | Anti-cavitation | Inlet Check |
|---|---|---|---|---|
| FK-10/16 | 10 | 16 | Yes | Yes |
| FK-12.5/16 | 12.5 | 16 | Yes | Yes |
| FK-16/20 | 16 | 20 | Yes | Yes |
| FKS-10/16 | 10 | 16 | Yes | Yes |
The FK block features a square design (82x82 mm), while the FKS block features a sector shape (94 mm wide). Both mount directly to the standard 4-bolt PSU flange.
| Dimension Item | FK Block | FKS Block |
|---|---|---|
| Mounting Type | 4-M20x1.5 port face | 4-M20x1.5 port face |
| Bolt Pattern | 44 x 44 mm | 44 x 44 mm |
Need help choosing the right pressure settings for your FK or FKS valve block? Tell us your system's relief pressure, and our engineers will confirm the exact model.
Q: Can I install this valve block on any steering unit?
It is designed for steering units that have a standard 4-bolt port face (44x44 mm pattern). It is commonly used with the 010 series and similar models.
Q: What is the difference between FK and FKS?
The FK has a square body, while the FKS has a sector-shaped body. Both provide the same hydraulic functions but may fit differently depending on your machine's space constraints.
For FK or FKS combination valve block selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.