HYRIG can supply the FLD series flow divider valves. These valves are used with open center steering units to ensure a constant flow to the steering system, even when system pressure or flow fluctuates.
In a shared pump system, the FLD valve prioritizes the steering circuit. It divides the incoming flow, sending a stable, constant flow to the steering unit while directing the excess flow to other auxiliary circuits. It is available in dividing flow and constant flow types.
Data source: Technical data table
| Model | Nominal Flow (L/min) | Max Working Pressure (MPa) | Matched PSU Model |
|---|---|---|---|
| FLD-6 | 6 | 12.5 | BZZ-80 |
| FLD-9.5 | 9.5 | 12.5 | BZZ-125 |
| FLD-15 | 15 | 12.5 | BZZ-200 |
| FLD-24 | 24 | 12.5 | BZZ-315 |
| FLD-37.5 | 37.5 | 12.5 | BZZ-500 |
| FLD-60 | 60 | 12.5 | BZZ-800 |
The FLD valve features a cast iron body with standard mounting holes. Port sizes range from M20x1.5 to M27x1.5 depending on the flow rating.
| Dimension Item | Standard Value (mm) |
|---|---|
| Mounting Holes | 3-Φ9 to 3-Φ10.5 (depends on model) |
| Port Size | M20x1.5 to M27x1.5 |
| Installation | Line mount or direct PSU integration |
Need to match an FLD valve to your steering unit and pump flow? Tell us your PSU displacement and pump output, and we will confirm the correct FLD model.
Q: What is the difference between dividing flow and constant flow types?
The dividing flow type splits the input flow proportionally. The constant flow type prioritizes the steering flow and sends the excess to the auxiliary circuit, ensuring stable steering even under load.
Q: Can I use this with a load sensing steering unit?
No, the FLD series is designed for open center steering systems. For load sensing systems, a priority valve (like the YXL series) should be used.
For FLD flow divider valve selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.