Hydril 310054W Bonnet Seal | 13-5/8" 10M Type X

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Hydril Type X ram BOP seal range and its spare parts. The Hydril 310054W is a bonnet seal designed for 13-5/8" 10M Type X ram BOPs, providing a high-pressure barrier between the bonnet and the BOP body.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Hydril Type X ram BOP seal range and its spare parts. The Hydril 310054W is a bonnet seal designed for 13-5/8" 10M Type X ram BOPs, providing a high-pressure barrier between the bonnet and the BOP body.

Key Facts

  • Product Name: Hydril Type X Bonnet Seal
  • Part Number: 310054W
  • BOP Size: 13-5/8"
  • Pressure Rating: 10,000 psi (10M)
  • Material: NBR (Nitrile Rubber)

Key Specifications

ParameterDetail
Part Number310054W
Component TypeBonnet Seal
Equipment TypeHydril Type X Ram BOP
BOP Size13-5/8"
Working Pressure10,000 psi
MaterialNBR (Nitrile Rubber)

Data source: Technical data table and official specifications.

Dimensions

ParameterDetail
Seal TypeBonnet Seal
Assembly PositionBetween bonnet and BOP body
WeightNot specified; confirm with supplier

Structure / Working Principle

The bonnet seal sits in a groove between the BOP body and the bonnet. When the bonnet is bolted closed, this seal is compressed, preventing wellbore pressure from escaping. It is a critical soft good that should be replaced every time the bonnet is opened.

Cross-Reference & Replacement

When replacing the bonnet seal, verify the part number against your equipment manual.

Related Components:

Selection Support

Not sure if this seal fits your bonnet? Provide your BOP model and pressure rating. HYRIG will confirm the correct Hydril seal.

Applications

Suitable for Hydril Type X ram BOPs (13-5/8" 10M) during bonnet maintenance or major overhauls.

Spare Parts

HYRIG provides replacement bonnet seals and soft goods kits for Hydril Type X BOPs.

Frequently Asked Questions

What material is this seal made of?
It is made of NBR (Nitrile Rubber) for standard service. HNBR is available for H2S or high-temp.

When should the bonnet seal be replaced?
It is best practice to replace it every time the bonnet is opened to prevent pressure leaks.

*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*

Contact

HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Hydril 310054W bonnet seal. For selection support, contact HYRIG: info@hyrig.com

Page last updated: 2026-10-28

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit