HYRIG can supply the Hydril Type X ram BOP seal range and its spare parts. The Hydril 3104956 is a top seal designed for 13-5/8" 10M Type X ram BOPs, providing a primary barrier against wellbore pressure.
| Parameter | Detail |
|---|---|
| Part Number | 3104956 |
| Component Type | Top Seal |
| Equipment Type | Hydril Type X Ram BOP |
| BOP Size | 13-5/8" |
| Working Pressure | 10,000 psi |
| Material | NBR (Nitrile Rubber) |
| API Standard | API 16A |
Data source: Technical data table and official specifications.
| Parameter | Detail |
|---|---|
| Seal Type | Ram Top Seal |
| Assembly Position | Upper ram body |
| Weight | Not specified; confirm with supplier |
The top seal is installed on the upper ram body in a Hydril Type X BOP. When the rams close, this seal energizes against the BOP body to prevent wellbore pressure from migrating past the ram assembly.
When replacing the 3104956 top seal, verify the part number against your equipment manual.
Related Components:
Not sure if this top seal fits your ram configuration? Provide your ram type and BOP model. HYRIG will confirm the correct Hydril seal.
Suitable for Hydril Type X ram BOPs (13-5/8" 10M) in high-pressure well control operations.
HYRIG provides replacement top seals for Hydril Type X BOPs.
Is this for standard pipe rams?
Yes, it is used on standard pipe, blind, and shear rams for the 13-5/8" 10M Type X BOP.
Can HYRIG supply the ram packers as well?
Yes, we supply the full range of Hydril 13-5/8" Type X ram packers.
*Disclaimer: This equipment is designed for high-pressure and hazardous well control applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.*
HYRIG is a China-based manufacturer and global supplier of well control equipment and elastomer spare parts. We can supply the Hydril 3104956 top seal. For selection support, contact HYRIG: info@hyrig.com
Page last updated: 2026-10-28
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.