Hydril PD55 Pulsation Dampener Bladder | 6922-0003-00

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Hydril PD55 pulsation dampener range and its spare parts. The Hydril PD55 bladder (Part No. 6922-0003-00) is a standard NBR (Nitrile Rubber) diaphragm component designed for PD55 mud pump pulsation dampeners to absorb pressure surges.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Hydril PD55 pulsation dampener range and its spare parts. The Hydril PD55 bladder (Part No. 6922-0003-00) is a standard NBR (Nitrile Rubber) diaphragm component designed for PD55 mud pump pulsation dampeners to absorb pressure surges.

Key Facts

  • Product Name: Hydril PD55 Pulsation Dampener Bladder
  • Part Number: 6922-0003-00
  • Equipment Type: Hydril PD55 Mud Pump Pulsation Dampener
  • Material: NBR (Nitrile Rubber)

Key Specifications

ParameterDetail
Part Number6922-0003-00
Component TypePulsation Dampener Bladder (Diaphragm)
Equipment TypeHydril PD55 Pulsation Dampener
MaterialNBR (Nitrile Rubber)
Standard ComplianceAPI 7K

Dimensions

ParameterDetail
CompatibilityPD55 Dampener
MaterialElastomer
WeightNot specified; confirm with supplier

Structure / Working Principle

The bladder is installed inside the upper chamber of the PD55 dampener cylinder. It separates the precharged gas (typically nitrogen) from the drilling fluid. During mud pump operation, the reciprocating plunger generates pressure fluctuations; the flexible NBR bladder expands and contracts to absorb these sudden pressure spikes.

Cross-Reference & Replacement

When servicing the PD55 dampener, inspect the internal components. Related parts:

Material Alternatives:

Related Accessories:

Selection Support

Need to confirm if this bladder fits your PD55 dampener? Contact HYRIG with your model and serial number.

Applications

Suitable for oil and gas drilling rigs using Hydril PD55 pulsation dampeners.

Spare Parts

HYRIG provides replacement soft goods for Hydril PD series pulsation dampeners.

Frequently Asked Questions

What is the difference between this and the HNBR version?

The 6922-0003-00 is the standard NBR bladder. For high-temperature or H2S service, use the HNBR version.

What precharge pressure should be used?

The precharge pressure should be set to 75% of the minimum operating system pressure, or a maximum of 2,000 psig.

Disclaimer: This equipment is designed for high-pressure and hazardous applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.

Contact

HYRIG is a China-based manufacturer and global supplier of mud pumps and spare parts. We can supply the Hydril PD55 pulsation dampener bladder. For selection support, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit